PIC24HJ32GP302_12 Datasheet, PDF (1/390 Pages) Microchip Technology – 16-bit Microcontrollers (up to 128 KB Flash and 8K SRAM) with Advanced Analog

PIC24HJ32GP302/304,
PIC24HJ64GPX02/X04 and
PIC24HJ128GPX02/X04
16-bit Microcontrollers
(up to 128 KB Flash and 8K SRAM) with Advanced Analog
Operating Conditions
• 3.0V to 3.6V, -40ºC to +150ºC, DC to 20 MIPS
• 3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS
Clock Management
• 2% internal oscillator
• Programmable PLL and oscillator clock sources
• Fail-Safe Clock Monitor (FSCM)
• Independent Watchdog Timer
• Low-power management modes
• Fast wake-up and start-up
High-Efficiency Math Engine
• Single-cycle MUL plus hardware divide
Advanced Analog Features
• 10/12-bit ADC with 1.1Msps/500 ksps conversion
rate:
- Up to 13 ADC input channels and four S&H
- Flexible/Independent trigger sources
• 150 ns Comparators:
- Up to two Analog Comparator modules
- 4-bit DAC with two ranges for Analog Comparators
Input/Output
• Software remappable pin functions
• 5V-tolerant pins
• Selectable open drain and internal pull-ups
• Up to 5 mA overvoltage clamp current/pin
• Multiple external interrupts
Packages
Type
SPDIP
SOIC
Pin Count
28
28
I/O Pins
21
21
Contact Lead/Pitch
.100''
1.27
Dimensions
1.365x.285x.135'' 17.9x7.50x2.05
Note: All dimensions are in millimeters (mm) unless specified.
System Peripherals
• Cyclic Redundancy Check (CRC) module
• Up to five 16-bit and up to two 32-bit Timers/
Counters
• Up to four Input Capture (IC) modules
• Up to four Output Compare (OC) modules
• Real-Time Clock and Calendar (RTCC) module
Communication Interfaces
• Parallel Master Port (PMP)
• Two UART modules (10 Mbps)
- Supports LIN 2.0 protocols
- RS-232, RS-485, and IrDA^® support
• Two 4-wire SPI modules (15 Mbps)
• Enhanced CAN (ECAN) module (1 Mbaud) with
2.0B support
• I²C module (100K, 400K and 1Mbaud) with
SMBus support
Direct Memory Access (DMA)
• 8-channel hardware DMA with no CPU stalls or
overhead
• UART, SPI, ADC, ECAN, IC, OC, INT0
Qualification and Class B Support
• AEC-Q100 REVG (Grade 0 -40ºC to +150ºC)
• Class B Safety Library, IEC 60730, VDE certified
Debugger Development Support
• In-circuit and in-application programming
• Two program breakpoints
• Trace and run-time watch
QFN-S
28
21
0.65
6x6x0.9
QFN
44
35
0.65
8x8x0.9
TQFP
44
35
0.80
10x10x1
© 2007-2012 Microchip Technology Inc.
DS70293G-page 1