PIC24HJ32GP302_12 Datasheet, PDF (245/390 Pages) Microchip Technology – 16-bit Microcontrollers (up to 128 KB Flash and 8K SRAM) with Advanced Analog

PIC24HJ32GP302/304, PIC24HJ64GPX02/X04 AND PIC24HJ128GPX02/X04
21.3 Comparator Voltage Reference
21.3.1 CONFIGURING THE COMPARATOR
VOLTAGE REFERENCE
The Voltage Reference module is controlled through
the CVRCON register (Register 21-2). The comparator
voltage reference provides two ranges of output
voltage, each with 16 distinct levels. The range to be
used is selected by the CVRR bit (CVRCON<5>). The
primary difference between the ranges is the size of the
steps selected by the CVREF Selection bits
(CVR3:CVR0), with one range offering finer resolution.
The comparator reference supply voltage can come
from either VDD and VSS, or the external VREF+ and
VREF-. The voltage source is selected by the CVRSS
bit (CVRCON<4>).
The settling time of the comparator voltage reference
must be considered when changing the CVREF
output.
FIGURE 21-2:
COMPARATOR VOLTAGE REFERENCE BLOCK DIAGRAM
VREF+
AVDD
CVREN
CVRSS = 1
CVRSRC
CVRSS = 0
8R
R
R
R
R
16 Steps
CVRR
VREF-
AVSS
R
R
R
8R
CVRSS = 1
CVRSS = 0
CVRCON<3:0>
CVREFIN
CVREF
CVROE (CVRCON<6>)
© 2007-2012 Microchip Technology Inc.
DS70293G-page 245