PIC24FV32KA304_1 Datasheet, PDF (272/320 Pages) Microchip Technology – 20/28/44/48-Pin, General Purpose, 16-Bit Flash Microcontrollers with XLP Technology

PIC24FV32KA304 FAMILY
TABLE 29-8: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD) (CONTINUED)
Standard Operating Conditions: 1.8V to 3.6V PIC24F32KA3XX
DC CHARACTERISTICS
2.0V to 5.5V PIC24FV32KA3XX
Operating temperature -40°C  TA  +85°C for Industrial
Parameter
No.
Device
Typical⁽¹⁾ Max
Units
Conditions
Power-Down Current (IPD) (Continued)
DC70
—
-40°C
DC70a
DC70b
0.03
—
—
µA
+25°C
+60°C
2.0V
DC70c
DC70d
PIC24FV32KA3XX
—
—
+85°C
-40°C
DC70e
DC70f
0.10
—
—
µA
+25°C
+60°C
5.0V
DC70g
DC70h
1.20
–
+85°C
-40°C
Deep Sleep Mode
DC70i
DC70j
0.02
—
—
µA
+25°C
+60°C
1.8V
DC70k
—
DC70l
PIC24F32KA3XX
—
+85°C
-40°C
DC70m
DC70n
0.08
—
—
µA
+25°C
+60°C
3.3V
DC70o
1.20
+85°C
Legend:
Note 1:
2:
3:
4:
5:
6:
Unshaded rows are PIC24F32KA3XX devices, and shaded rows are PIC24FV32KA3XX devices.
Data in the Typical column is at 3.3V, 25°C (PIC24F32KA3XX); 5.0V, 25°C (PIC24FV32KA3XX) unless
otherwise stated. Parameters are for design guidance only and are not tested.
Base IPD is measured with all peripherals and clocks shut down. All I/Os are configured as outputs and set
low, PMSLP is set to ‘0’, and WDT, etc., are all switched off.
The  current is the additional current consumed when the module is enabled. This current should be
added to the base IPD current.
Current applies to Sleep only.
Current applies to Sleep and Deep Sleep.
Current applies to Deep Sleep only.
DS39995B-page 272
 2011 Microchip Technology Inc.