PIC24FJ256GB106-I Datasheet, PDF (270/328 Pages) Microchip Technology – 64/80/100-Pin, 16-Bit Flash Microcontrollers with USB On-The-Go (OTG)

PIC24FJ256GB110 FAMILY
REGISTER 24-1: CTMUCON: CTMU CONTROL REGISTER (CONTINUED)
bit 3-2
bit 1
bit 0
EDG1SEL1:EDG1SEL0: Edge 1 Source Select bits
11 = CTED1 pin
10 = CTED2 pin
01 = OC1 module
00 = Timer1 module
EDG2STAT: Edge 2 Status bit
1 = Edge 2 event has occurred
0 = Edge 2 event has not occurred
EDG1STAT: Edge 1 Status bit
1 = Edge 1 event has occurred
0 = Edge 1 event has not occurred
REGISTER 24-2: CTMUICON: CTMU CURRENT CONTROL REGISTER
R/W-0
ITRIM5
bit 15
R/W-0
ITRIM4
R/W-0
ITRIM3
R/W-0
ITRIM2
R/W-0
ITRIM1
R/W-0
ITRIM0
R/W-0
IRNG1
R/W-0
IRNG0
bit 8
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 7
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-10
bit 9-8
bit 7-0
ITRIM5:ITRIM0: Current Source Trim bits
011111 = Maximum positive change from nominal current
011110
.....
000001 = Minimum positive change from nominal current
000000 = Nominal current output specified by IRNG1:IRNG0
111111 = Minimum negative change from nominal current
.....
100010
100001 = Maximum negative change from nominal current
IRNG1:IRNG0: Current Source Range Select bits
11 = 100 × Base current
10 = 10 × Base current
01 = Base current level (0.55 μA nominal)
00 = Current source disabled
Unimplemented: Read as ‘0’
DS39897B-page 268
Preliminary
© 2008 Microchip Technology Inc.