PIC24FJ256GA106T-I Datasheet, PDF (267/292 Pages) Microchip Technology – 64/80/100-Pin, 16-Bit General Purpose Flash Microcontrollers with Peripheral Pin Select

PIC24FJ256GA110 FAMILY
27.2 AC Characteristics and Timing Parameters
The information contained in this section defines the PIC24FJ256GA110 family AC characteristics and timing parameters.
TABLE 27-11: TEMPERATURE AND VOLTAGE SPECIFICATIONS – AC
AC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
Operating voltage VDD range as described in Section 27.1 “DC Characteristics”.
FIGURE 27-2:
LOAD CONDITIONS FOR DEVICE TIMING SPECIFICATIONS
Load Condition 1 – for all pins except OSCO
Load Condition 2 – for OSCO
VDD/2
RL
Pin
CL
VSS
Pin
CL
VSS
RL = 464Ω
CL = 50 pF for all pins except OSCO
15 pF for OSCO output
TABLE 27-12: CAPACITIVE LOADING REQUIREMENTS ON OUTPUT PINS
Param
No.
Symbol
Characteristic
Min Typ⁽¹⁾ Max Units
Conditions
DO50 COSC2 OSCO/CLKO pin
—
— 15 pF In XT and HS modes when
external clock is used to drive
OSCI.
DO56 CIO
DO58 CB
All I/O pins and OSCO
SCLx, SDAx
—
— 50 pF EC mode.
—
— 400 pF In I²C™ mode.
Note 1: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
© 2008 Microchip Technology Inc.
Preliminary
DS39905B-page 265