PIC16F877-20L Datasheet, PDF (23/218 Pages) Microchip Technology – 28/40-Pin 8-Bit CMOS FLASH Microcontrollers

PIC16F87X
2.2.2.6 PIE2 Register
The PIE2 register contains the individual enable bits for
the CCP2 peripheral interrupt, the SSP bus collision
interrupt, and the EEPROM write operation interrupt.
REGISTER 2-6:
PIE2 REGISTER (ADDRESS 8Dh)
U-0
R/W-0
U-0
— Reserved —
bit 7
R/W-0
EEIE
R/W-0
BCLIE
U-0
U-0
R/W-0
—
—
CCP2IE
bit 0
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2-1
bit 0
Unimplemented: Read as '0'
Reserved: Always maintain this bit clear
Unimplemented: Read as '0'
EEIE: EEPROM Write Operation Interrupt Enable
1 = Enable EE Write Interrupt
0 = Disable EE Write Interrupt
BCLIE: Bus Collision Interrupt Enable
1 = Enable Bus Collision Interrupt
0 = Disable Bus Collision Interrupt
Unimplemented: Read as '0'
CCP2IE: CCP2 Interrupt Enable bit
1 = Enables the CCP2 interrupt
0 = Disables the CCP2 interrupt
Legend:
R = Readable bit
- n = Value at POR
W = Writable bit
’1’ = Bit is set
U = Unimplemented bit, read as ‘0’
’0’ = Bit is cleared x = Bit is unknown
 1998-2013 Microchip Technology Inc.
DS30292D-page 23