PIC16LF1507 Datasheet, PDF (228/266 Pages) Microchip Technology – 20-Pin Flash, 8-Bit Microcontrollers

PIC16(L)F1507
25.4
DC Characteristics: PIC16(L)F1507-I/E
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Param
No.
Sym.
Characteristic
Min.
Typ†
Max. Units
Conditions
VIL
Input Low Voltage
I/O PORT:
D030
D030A
D031
D032
with TTL buffer
—
—
with Schmitt Trigger buffer
—
MCLR
—
—
0.8
V 4.5V  VDD  5.5V
—
0.15 VDD V 1.8V  VDD  4.5V
—
0.2 VDD V 2.0V  VDD  5.5V
—
0.2 VDD V
VIH
Input High Voltage
I/O ports:
—
—
D040
D040A
with TTL buffer
2.0
—
0.25 VDD +
—
0.8
—
V 4.5V  VDD 5.5V
—
V 1.8V  VDD  4.5V
D041
D042
IIL
D060
D061
D070*
IPUR
VOL
D080
VOH
D090
with Schmitt Trigger buffer
MCLR
Input Leakage Current⁽¹⁾
I/O ports
0.8 VDD
0.8 VDD
—
MCLR⁽²⁾
Weak Pull-up Current
Output Low Voltage⁽³⁾
I/O ports
Output High Voltage⁽³⁾
I/O ports
—
25
25
—
VDD - 0.7
—
—
±5
±5
± 50
100
140
—
—
—
V 2.0V  VDD  5.5V
—
V
± 125
± 1000
± 200
nA VSS  VPIN  VDD, Pin at high-
impedance at 85°C
nA 125°C
nA VSS  VPIN  VDD at 85°C
200
VDD = 3.3V, VPIN = VSS
300
A VDD = 5.0V, VPIN = VSS
IOL = 8mA, VDD = 5V
0.6
V IOL = 6mA, VDD = 3.3V
IOL = 1.8mA, VDD = 1.8V
IOH = 3.5mA, VDD = 5V
—
V IOH = 3mA, VDD = 3.3V
IOH = 1mA, VDD = 1.8V
D101A* CIO
Capacitive Loading Specs on Output Pins
All I/O pins
—
—
50
pF
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
Note 1: Negative current is defined as current sourced by the pin.
2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels represent
normal operating conditions. Higher leakage current may be measured at different input voltages.
3: Including OSC2 in CLKOUT mode.
 2011 Microchip Technology Inc.
Preliminary
DS41586A-page 228