PIC16LF1507 Datasheet, PDF (118/266 Pages) Microchip Technology – 20-Pin Flash, 8-Bit Microcontrollers

PIC16(L)F1507
13.3 FVR Control Registers
REGISTER 13-1: FVRCON: FIXED VOLTAGE REFERENCE CONTROL REGISTER
R/W-0/0
R-q/q
R/W-0/0
R/W-0/0
U-0
FVREN
FVRRDY⁽¹⁾
TSEN
TSRNG
—
bit 7
U-0
R/W-0/0
R/W-0/0
—
ADFVR<1:0>
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
q = Value depends on condition
bit 7
bit 6
bit 5
bit 4
bit 3-2
bit 1-0
FVREN: Fixed Voltage Reference Enable bit
1 = Fixed Voltage Reference is enabled
0 = Fixed Voltage Reference is disabled
FVRRDY: Fixed Voltage Reference Ready Flag bit⁽¹⁾
1 = Fixed Voltage Reference output is ready for use
0 = Fixed Voltage Reference output is not ready or not enabled
TSEN: Temperature Indicator Enable bit
1 = Temperature Indicator is enabled
0 = Temperature Indicator is disabled
TSRNG: Temperature Indicator Range Selection bit
1 = VOUT = VDD - 4VT (High Range)
0 = VOUT = VDD - 2VT (Low Range)
Unimplemented: Read as ‘0’
ADFVR<1:0>: ADC Fixed Voltage Reference Selection bit
11 = ADC Fixed Voltage Reference Peripheral output is 4x (4.096V)⁽²⁾
10 = ADC Fixed Voltage Reference Peripheral output is 2x (2.048V)⁽²⁾
01 = ADC Fixed Voltage Reference Peripheral output is 1x (1.024V)
00 = ADC Fixed Voltage Reference Peripheral output is off
Note 1: FVRRDY is always ‘1’ for the PIC16F1507 devices.
2: Fixed Voltage Reference output cannot exceed VDD.
TABLE 13-2: SUMMARY OF REGISTERS ASSOCIATED WITH THE FIXED VOLTAGE REFERENCE
Name
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
FVRCON
FVREN FVRRDY
TSEN
TSRNG
—
Legend: Shaded cells are unused by the Fixed Voltage Reference module.
Bit 2
—
Bit 1
Bit 0
ADFVR<1:0>
Register
on page
118
 2011 Microchip Technology Inc.
Preliminary
DS41586A-page 118