PIC16LF1507 Datasheet, PDF (16/266 Pages) Microchip Technology – 20-Pin Flash, 8-Bit Microcontrollers

FIGURE 3-1:
PROGRAM MEMORY MAP
AND STACK FOR
PIC16(L)F1507
PC<14:0>
CALL, CALLW
RETURN, RETLW
15
Interrupt, RETFIE
Stack Level 0
Stack Level 1
Stack Level 15
Reset Vector
0000h
On-chip
Program
Memory
Interrupt Vector
Page 0
RWolrloavpesrtotoPPaaggee00
0004h
0005h
07FFh
0800h
Wraps to Page 0
Wraps to Page 0
PIC16(L)F1507
3.1.1
READING PROGRAM MEMORY AS
DATA
There are two methods of accessing constants in pro-
gram memory. The first method is to use tables of
RETLW instructions. The second method is to set an
FSR to point to the program memory.
3.1.1.1 RETLW Instruction
The RETLW instruction can be used to provide access
to tables of constants. The recommended way to create
such a table is shown in Example 3-1.
EXAMPLE 3-1:
constants
BRW
RETLW DATA0
RETLW DATA1
RETLW DATA2
RETLW DATA3
RETLW INSTRUCTION
;Add Index in W to
;program counter to
;select data
;Index0 data
;Index1 data
my_function
;… LOTS OF CODE…
MOVLW
DATA_INDEX
call constants
;… THE CONSTANT IS IN W
The BRW instruction makes this type of table very sim-
ple to implement. If your code must remain portable
with previous generations of microcontrollers, then the
BRW instruction is not available so the older table read
method must be used.
Rollover to Page 0
7FFFh
 2011 Microchip Technology Inc.
Preliminary
DS41586A-page 16