PIC16LF1507 Datasheet, PDF (11/266 Pages) Microchip Technology – 20-Pin Flash, 8-Bit Microcontrollers

PIC16(L)F1507
TABLE 1-2: PIC16(L)F1507 PINOUT DESCRIPTION
Name
Function
Input Output
Type Type
Description
RA0/AN0/ICSPDAT
RA0
TTL CMOS General purpose I/O.
AN0
AN
— A/D Channel input.
ICSPDAT ST CMOS ICSP™ Data I/O.
RA1/AN1/VREF+/ICSPCLK
RA1
TTL CMOS General purpose I/O.
AN1
AN
— A/D Channel input.
VREF+
AN
— A/D Positive Voltage Reference input.
ICSPCLK ST
— Serial Programming Clock.
RA2/AN2/T0CKI/INT/PWM3/
CLC1⁽¹⁾/CWG1FLT
RA2
AN2
ST CMOS General purpose I/O.
AN
— A/D Channel input.
T0CKI
ST
— Timer0 clock input.
INT
ST
— External interrupt.
PWM3
— CMOS Pulse Width Module source output.
CLC1
— CMOS Configurable Logic Cell source output.
CWG1FLT ST
— Complementary Waveform Generator Fault input.
RA3/CLC1IN0/VPP/MCLR
RA3
TTL
— General purpose input.
CLC1IN0
ST
— Configurable Logic Cell source input.
VPP
HV
— Programming voltage.
MCLR
ST
— Master Clear with internal pull-up.
RA4/AN3/CLKOUT/T1G
RA4
TTL CMOS General purpose I/O.
AN3
AN
— A/D Channel input.
CLKOUT
— CMOS FOSC/4 output.
T1G
ST
— Timer1 Gate input.
RA5/CLKIN/T1CKI/NCO1CLK
RA5
TTL CMOS General purpose I/O.
CLKIN CMOS — External clock input (EC mode).
T1CKI
ST
— Timer1 clock input.
NCO1CLK ST
— Numerically Controlled Oscillator Clock source input.
RB4/AN10
RB4
TTL CMOS General purpose I/O.
AN10
AN
— A/D Channel input.
RB5/AN11
RB5
TTL CMOS General purpose I/O.
AN11
AN
— A/D Channel input.
RB6
RB6
TTL CMOS General purpose I/O.
RB7
RB7
TTL CMOS General purpose I/O.
RC0/AN4/CLC2
RC0
TTL CMOS General purpose I/O.
AN4
AN
— A/D Channel input.
CLC2
— CMOS Configurable Logic Cell source output.
RC1/AN5/PWM4/NCO1⁽¹⁾
RC1
TTL CMOS General purpose I/O.
AN5
AN
— A/D Channel input.
PWM4
— CMOS Pulse Width Module source output.
NCO1
— CMOS Numerically Controlled Oscillator is source output.
RC2/AN6
RC2
TTL CMOS General purpose I/O.
AN6
AN
— A/D Channel input.
Legend: AN = Analog input or output CMOS = CMOS compatible input or output
OD = Open Drain
TTL = TTL compatible input ST = Schmitt Trigger input with CMOS levels I²C™ = Schmitt Trigger input with I²C
HV = High Voltage
XTAL = Crystal
levels
Note 1: Default location for peripheral pin function. Alternate location can be selected using the APFCON register.
2: Alternate location for peripheral pin function selected by the APFCON register.
DS41586A-page 11
Preliminary
 2011 Microchip Technology Inc.