PIC24FJ64GA006-I Datasheet, PDF (219/258 Pages) Microchip Technology – 64/80/100-Pin, General Purpose, 16-Bit Flash Microcontrollers

PIC24FJ128GA010 FAMILY
TABLE 27-5: DC CHARACTERISTICS: OPERATING CURRENT (IDD)
DC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
Parameter
No.
Typical⁽¹⁾
Max
Units
Conditions
Operating Current (IDD)⁽²⁾
DC20
1.6
4.0
mA
-40°C
DC20a
1.6
4.0
mA
+25°C
2.5V⁽³⁾
DC20b
DC20d
1.6
4.0
mA
1.6
4.0
mA
+85°C
-40°C
1 MIPS
DC20e
1.6
4.0
mA
+25°C
3.6V⁽⁴⁾
DC20f
1.6
4.0
mA
+85°C
DC23
6.0
12
mA
-40°C
DC23a
6.0
12
mA
+25°C
2.5V⁽³⁾
DC23b
DC23d
6.0
12
mA
6.0
12
mA
+85°C
-40°C
4 MIPS
DC23e
6.0
12
mA
+25°C
3.6V⁽⁴⁾
DC23f
6.0
12
mA
+85°C
DC24
20
32
mA
-40°C
DC24a
20
32
mA
+25°C
2.5V⁽³⁾
DC24b
DC24d
20
32
mA
20
32
mA
+85°C
-40°C
16 MIPS
DC24e
20
32
mA
+25°C
3.6V⁽⁴⁾
DC24f
20
32
mA
+85°C
DC31
70
150
A
-40°C
DC31a
100
200
A
+25°C
2.5V⁽³⁾
DC31b
DC31d
200
400
A
70
150
A
+85°C
-40°C
LPRC (31 kHz)
DC31e
100
200
A
+25°C
3.6V⁽⁴⁾
DC31f
200
400
A
+85°C
Note 1: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O
pin loading and switching rate, oscillator type, internal code execution pattern and temperature, also have
an impact on the current consumption. The test conditions for all IDD measurements are as follows: OSC1
driven with external square wave from rail-to-rail. All I/O pins are configured as inputs and pulled to VDD.
MCLR = VDD; WDT and FSCM are disabled. CPU, SRAM, program memory and data memory are
operational. No peripheral modules are operating and PMD bits are set.
3: On-chip voltage regulator is disabled (ENVREG tied to VSS).
4: On-chip voltage regulator is enabled (ENVREG tied to VDD).
 2005-2012 Microchip Technology Inc.
DS39747F-page 219