PIC24FJ64GA006-I Datasheet, PDF (1/258 Pages) Microchip Technology – 64/80/100-Pin, General Purpose, 16-Bit Flash Microcontrollers

PIC24FJ128GA010 FAMILY
64/80/100-Pin, General Purpose, 16-Bit Flash Microcontrollers
High-Performance CPU:
• Modified Harvard Architecture
• Up to 16 MIPS Operation @ 32 MHz
• 8 MHz Internal Oscillator with 4x PLL Option and
Multiple Divide Options
• 17-Bit x 17-Bit Single-Cycle Hardware
Multiplier
• 32-Bit by 16-Bit Hardware Divider
• 16 x 16-Bit Working Register Array
• C Compiler Optimized Instruction Set Architecture:
- 76 base instructions
- Flexible addressing modes
• Two Address Generation Units for Separate Read
and Write Addressing of Data Memory
Special Microcontroller Features:
• Operating Voltage Range of 2.0V to 3.6V
• Flash Program Memory:
- 1000 erase/write cycles
- 20-year data retention minimum
• Self-Reprogrammable under Software Control
• Selectable Power Management modes:
- Sleep, Idle and Alternate Clock modes
• Fail-Safe Clock Monitor Operation:
- Detects clock failure and switches to on-chip,
low-power RC oscillator
• On-Chip 2.5V Regulator
• JTAG Boundary Scan and Programming Support
• Power-on Reset (POR), Power-up Timer (PWRT)
and Oscillator Start-up Timer (OST)
• Flexible Watchdog Timer (WDT) with On-Chip,
Low-Power RC Oscillator for Reliable Operation
• In-Circuit Serial Programming™ (ICSP™) and
In-Circuit Emulation (ICE) via 2 Pins
Analog Features:
• 10-Bit, Up to 16-Channel Analog-to-Digital Converter
- 500 ksps conversion rate
- Conversion available during Sleep and Idle
• Dual Analog Comparators with Programmable
Input/Output Configuration
Peripheral Features:
• Two 3-Wire/4-Wire SPI modules, Supporting
4 Frame modes with 8-Level FIFO Buffer
• Two I²C™ modules Support Multi-Master/Slave
mode and 7-Bit/10-Bit Addressing
• Two UART modules:
- Supports RS-232, RS-485 and LIN/J2602
- On-chip hardware encoder/decoder for IrDA^®
- Auto-wake-up on Start bit
- Auto-Baud Detect
- 4-level FIFO buffer
• Parallel Master Slave Port (PMP/PSP):
- Supports 8-bit or 16-bit data
- Supports 16 address lines
• Hardware Real-Time Clock/Calendar (RTCC):
- Provides clock, calendar and alarm functions
• Programmable Cyclic Redundancy Check (CRC)
- User-programmable polynomial
- 8/16-level FIFO buffer
• Five 16-Bit Timers/Counters with Programmable
Prescaler
• Five 16-Bit Capture Inputs
• Five 16-Bit Compare/PWM Outputs
• High-Current Sink/Source (18 mA/18 mA) on All
I/O Pins
• Configurable, Open-Drain Output on Digital I/O Pins
• Up to 5 External Interrupt Sources
• 5.5V Tolerant Input (digital pins only)
Device
Pins
Program
Memory
(Bytes)
SRAM
(Bytes)
Timers
16-Bit
PIC24FJ64GA006
64
64K
8K
PIC24FJ96GA006
64
96K
8K
PIC24FJ128GA006
64
128K
8K
PIC24FJ64GA008
80
64K
8K
PIC24FJ96GA008
80
96K
8K
PIC24FJ128GA008
80
128K
8K
PIC24FJ64GA010
100
64K
8K
PIC24FJ96GA010
100
96K
8K
PIC24FJ128GA010 100 128K
8K
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
SPI
I²C™
10-Bit
A/D (ch)
5
2
2
2
5
2
2
2
5
2
2
2
5
2
2
2
5
2
2
2
5
2
2
2
5
2
2
2
5
2
2
2
5
2
2
2
16
2 YY
16
2 YY
16
2 YY
16
2 YY
16
2 YY
16
2 YY
16
2 YY
16
2 YY
16
2 YY
 2005-2012 Microchip Technology Inc.
DS39747F-page 1