MIC3002_10 Datasheet, PDF (63/65 Pages) Micrel Semiconductor – FOM Management IC with Internal Calibration

Micrel, Inc.
MIC3002
OEM Scratchpad Registers (SCRATCHn)
Default Value
0000 0000b = 00h
Serial Address
A6h
Byte Address
135-143 (87-8F_h)
156-159 (9C-9F_h)
172-175 (AC-AF_h)
188-191 (BC-BF_h)
204-207 (CC-CF_h)
222-250 (DE-FA_h)
The scratchpad registers are general-purpose non-volatile memory locations. They can be freely read from and written to any
time the MIC3002 is in OEM mode.
RX Power Look-up Table (RXLUTn)
Default Value
Serial Address
Byte Address
0000 0000b = 00h
A6h
40-71 = 28h - 47h
These registers are non-volatile and will be maintained through power and reset cycles. A valid OEM password is required for
access to these registers.
Bytes
RXSLP0h
RXSLP0l
RXOFF0h
RXOFF0l
RXSLP1h
RXSLP1l
RXOFF1h
RXOFF1l
•
•
•
RXSLP7h
RXSLP7l
RXOFF7h
RXOFF7l
RX Slope 0, High Byte.
RX Slope 0, Low Byte.
RX Offset 0, High Byte.
RX Offset 0, Low Byte.
RX Slope 1, High Byte.
RX Slope 1, Low Byte.
RX Offset 1, High Byte.
RX Offset 1, Low Byte.
•
•
•
RX Slope 7, High Byte.
RX Slope 7, Low Byte.
RX Offset 7, High Byte.
RX Offset 7, Low Byte.
Definition
Calibration Constants (CALn)
Default Value
Serial Address
Byte Address
0000 0000b = 00h
A6h
74 - 87 = 4A h - 57h
These registers are non-volatile and will be maintained through power and reset cycles. A valid OEM password is required for
access to these registers.
July 2007
63
M9999-073107-B
[e-mail] or [phone]