MIC3002_10 Datasheet, PDF (20/65 Pages) Micrel Semiconductor – FOM Management IC with Internal Calibration

Micrel, Inc.
MIC3002
Entry
Address
Temperature Range
0
A6: 96 (60h)
t ≤ -45 ºC
1
A6: 97 (61h)
-44 ºC ≤ t ≤ -41 ºC
2
A6: 98 (62h)
-40 ºC ≤ t ≤ -37 ºC
…………………………………………………………………………………
…………………………………………………………………………………
36
A6: 97 (61h)
96 ºC ≤ t ≤ 99 ºC
37
A6: 97 (61h)
100 ≤ t ≤ 103 ºC
38
A6: 134 (86h)
t ≥ 104 ºC
Table 7. L.U.T. for Temperature Reading Compensation
Alarms and Warnings Interrupt Source Masking
Alarms and warnings set the flags and Interrupt when
they are asserted if they are not masked (default). If an
alarm or warning is masked, it will not set the Interrupt.
Table 8 shows the locations of the masking bits. The
warning or alarm is masked if the corresponding bit is
set to 1.
Serial Address A2h
Byte
Bit
7
6
5
248
4
3
2
1
0
7
6
5
249
4
3
2
1
0
Default Value
0
0
0
0
0
0
0
0
0
1
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Description
Masking bit for Temp High Alarm interrupt source
Masking bit for Temp Low Alarm interrupt source
Masking bit for Voltage High Alarm interrupt source
Masking bit for Voltage Low Alarm interrupt source
Masking bit for Bias High Alarm interrupt source
Masking bit for Bias Low Alarm interrupt source
Masking bit for TX Power High Alarm interrupt source
Masking bit for TX Power Low Alarm interrupt source
Masking bit for RX Power High Alarm interrupt source
Masking bit for RX Power Low Alarm interrupt source
Table 8. Alarms Interrupt Sources Masking Bits
July 2007
20
M9999-073107-B
[e-mail] or [phone]