MAX1101 Datasheet, PDF (11/12 Pages) Maxim Integrated Products – Single-Chip, 8-Bit CCD Digitizer with Clamp and 6-Bit PGA

Single-Chip, 8-Bit CCD Digitizer
with Clamp and 6-Bit PGA
__________________Pin Configuration
100.00
TOP VIEW
10.00
1.00
0.10
0.01
3
4 5 6 7 8 9 10
NUMBER OF TIME CONSTANTS
Figure 13. Black Level Error vs. C_EXT Time Constant at
Maximum PGA Gain (1mV/bit)
Bypassing and Layout Considerations
Solder the MAX1101 to a multilayer board (two or more
layers) where the layer immediately beneath the device
is a ground plane.
Connect the V_DD pins together at the MAX1101. Connect
all ground pins together at the device.
Bypass V_DD to ground with at least a 0.1µF ceramic
capacitor. If larger capacitors are used, tantalum is
satisfactory.
GND 1
CCDIN 2
GND 3
AIN1 4
GND 5
AIN2 6
GND 7
I.C. 8
I.C. 9
I.C. 10
REFGND 11
REF- 12
MAX1101
SO
24 GND
23 VDD
22 BLKSAMP
21 VIDSAMP
20 LOAD
19 DATA
18 SCLK
17 MODE
16 GND
15 VDD
14 REFBIAS
13 REF+
___________________Chip Information
TRANSISTOR COUNT: 3430
______________________________________________________________________________________ 11