6000 Datasheet, PDF (7/41 Pages) List of Unclassifed Manufacturers – THE BREAD BOARDING MEDIUM FOR SURFACE MOUNT

7 | Keysight | InfiniiVision 6000 X-Series Oscilloscopes - Data Sheet
New Standard for Price Performance: Bandwidth, Visualization, and Integration
Visualization (Continued)
Visualize by ultimate isolation: The InfiniiScan
Zone touch trigger
One of the biggest challenges of using an oscilloscope is setting
up an advanced trigger to isolate a signal of interest. While
advanced triggers are powerful features, setting them up can
slow you down. The InfiniiScan Zone touch trigger provides a
turnkey trigger solution. You simply observe the signal of interest
on the display and draw a zone (box) around it with your finger.
What used to take hours of work can now take just a few seconds.
If you want to move your zones to another location, just drag
them over. The 6000 X-Series can be set up to easily trigger on
one or two zone boxes simultaneously with either “must intersect”
or “must not intersect” conditions. Unlike other software-based
graphical trigger solutions, the hardware-based InfiniiScan Zone
triggering maintains the fast update rate of 160,000 waveforms
per second. In other words, if you can see it, you can trigger on it.
Visualize by protocol isolation: Serial protocol
trigger + the InfiniiScan Zone trigger
If isolating signal anomalies is challenging, isolating analog signal
phenomenon in relation to specific serial protocol packets is a
doubly difficult task. You can trigger on CAN bus errors if your
oscilloscope has a CAN serial bus trigger and decode option,
but how would you isolate a specific CAN error message from all
others?
Use the hardware-based InfiniiScan Zone trigger along with
serial protocol triggers. In Figures 13 and 14, we isolated a CAN
steering bus error message.
Figure 11. Draw a zone (box) around the anomaly.
Figure 13. Setting up the InfiniiScan Zone trigger in addition to a CAN bus
error packet trigger.
Figure 12. Hardware InfiniiScan Zone triggers immediately.
Figure 14. Now you have isolated steering errors from all other CAN bus
errors.