6000 Datasheet, PDF (13/41 Pages) List of Unclassifed Manufacturers – THE BREAD BOARDING MEDIUM FOR SURFACE MOUNT

13 | Keysight | InfiniiVision 6000 X-Series Oscilloscopes - Data Sheet
New Standard for Price Performance: Bandwidth, Visualization, and Integration
Integration (Continued)
Integrate protocol analysis: Optional hardware-
based serial bus protocol decode and trigger
Keysight Technologies, Inc. InfiniiVision X-Series scopes are
the only oscilloscopes that use hardware-based serial protocol
decoding. Other vendors’ oscilloscopes use software post-
processing techniques to decode serial packets ⁄ frames.
Software implementations have slow waveform and decode
capture rates and can miss critical events and errors due to long
dead-times. Faster decoding with hardware-based technology
enhances your probability of capturing infrequent serial
communication errors. Some serial protocol decodes come with a
standard event counter, which is another benefit of the hardware-
based implementation.
After capturing serial bus communication, you can easily
perform a search operation based on specific criteria and then
quickly navigate to bytes/frames of serial data that satisfy
that search criteria. The 6000 X-Series can decode two serial
buses simultaneously using hardware-based decoding, and
display the captured data in a time interleaved lister display.
The 6000 X-Series has eight options supporting 10 different
serial protocols, including I²C, SPI ¹, USB 2.0, RS232/UART, CAN
(CAN-dbc), CAN-FD (ISO and non-ISO), LIN, LIN symbolic, SENT,
FlexRay, MIL-STD 1553, ARINC 429, and I²S (see page 26).
1.  SPI trigger and decode requires 4, 2+16, or 4+16 channel 6000 X-Series.
Figure 29. Dual-channel generator generating a differential signal.
Figure 30. USB 2.0 protocol trigger and decode option display.
Integrate a quick tester: Optional 3-digit digital
voltmeter
You can add an integrated 3-digit voltmeter (Option DSOXDVMCTR)
to your 6000 X-Series oscilloscope. The voltmeter operates
through the same probes as the oscilloscope channels. However,
the DVM measurements are made independently from the
oscilloscope acquisition and triggering system so you can make
both the DVM and triggered oscilloscope waveform captures with
the same connection. The voltmeter results are always displayed,
keeping these quick characterization measurements at your
fingertips.
Figure 31. DVM display.