6000 Datasheet, PDF (18/41 Pages) List of Unclassifed Manufacturers – THE BREAD BOARDING MEDIUM FOR SURFACE MOUNT

18 | Keysight | InfiniiVision 6000 X-Series Oscilloscopes - Data Sheet
New Standard for Price Performance: Bandwidth, Visualization, and Integration
Integration (Continued)
Optional HDTV video triggering and analysis
Whether you are debugging consumer electronics with HDTV
or characterizing a design, the HDTV measurement application
(Option DSOX6VID) provides support for a variety of HDTV
standards for triggering and analysis. The 450,000 waveforms/
sec capture rate of the 6000 X-Series, coupled with its intensity-
graded view of the signal, provides even more details than a
traditional analog oscilloscope.
See www.keysight.com/find/DSOX6VID for more information.
Optional Xilinx FPGA dynamic probe
The Xilinx FPGA dynamic probe for the 6000 X-Series (Option
DSOX6FPGAX) allows internal FPGA signal activity to be
correlated to external signal activity. Running on an external
PC, it allows you to switch between up to 64 signals inside the
FPGA for each debug pin on the outside of the FPGA in seconds,
all while automatically mapping internal signal names to the
oscilloscope channel labels. The DSOX6FPGAX supports the
Virtex-6 series, Virtex-5 series, Virtex-4 series, Virtex-II Pro
series, Virtex-II series, and Spartan-3 series devices.
Figure 45. Triggering on a 1080p/60 signal.
See www.keysight.com/find/FPGA for more information.
Hardware and software bandwidth limit filters
(low-pass filters)
More bandwidth generally enhances your measurements except
when you want to limit excess noise coming from additional
bandwidth. The 6000 X-Series oscilloscopes provide two
standard bandwidth-limiting filters, one in the hardware and the
other implemented in software (a math function). Now you can
select the optimal bandwidth for your measurement.
Hardware bandwidth
filter
Software bandwidth
filter (low pass filter
function)
1 MΩ
50 Ω
20 MHz, 200 MHz
20 MHz, 200 MHz, 1.5 GHz ¹,
3 GHz ²
1 Hz through bandwidth of
scope
1.  With 2.5 GHz, 4 GHz, or 6 GHz licensed 6000 X-Series only.
2.  With 4 GHz or 6 GHz licensed 6000 X-Series only.
Figure 46. FPGA dynamic probe screen.
High-resolution mode for viewing signal details
To gain more confidence in your designs, sometimes you need to
look into more signal detail than you can see with the standard
8-bit vertical resolution of the 6000 X-Series oscilloscopes.
High-resolution mode offers additional resolution and insight into
the signal, without requiring a repetitive signal. Using real-time
boxcar averaging, high-resolution mode reduces random noise
and effectively increases vertical resolution up to 12 bits.