W9082B Datasheet, PDF (14/19 Pages) Keysight Technologies – X-Series Measurement Application

14 | Keysight | LTE and LTE-Advanced FDD/TDD X-Series Measurement Application - Technical Overview
Key Speciications (continued)
Description
PXA
MXA
EXA
CXA
Spectrum emission mask
Dynamic range
– 5 MHz
– 10 MHz
– 20 MHz
Sensitity
Accuracy
– Relative
– Absolute
82.9 (86.8 dB typ)
86.6 (90.7 dB typ)
84.3 (89.7 dB typ)
–98.5 (–101.5 dBm typ)
76.2 (82.9 dB typ)
77.8 (83.8 dB typ)
78.2 (84.9 dB typ)
–94.5 (–99.5 dBm typ)
72.6 (79.4 dB typ)
73.5 (80.3 dB typ)
73.4 (80.6 dB typ)
–92.5 (–96.5 dBm typ)
69.0 (75.4 dB typ)
69.3 (75.5 dB typ)
69.8 (76.0 dB typ)
–86.5 (–92.5 dBm typ)
± 0.06 dB
± 0.13 dB
± 0.13 dB
± 0.33 dB
± 0.62 (± 0.20 dB 95%) ± 0.88 (± 0.27 dB 95%) ± 1.15 (± 0.31 dB 95%) ± 1.53 (± 0.97 dB 95%)
Spurious emissions
Dynamic range, relative
Sensitivity, absolute
Accuracy (attenuation = 10 dB)
– Frequency range
– Frequency range
– Frequency range
88.8 (92.1 dB typ)
–88.5 (–91.5 dBm typ)
± 0.19 dB (95%)
20 Hz to 3.6 GHz
± 1.08 dB (95%)
3.5 GHz to 8.4 GHz
± 1.48 dB (95%)
8.3 GHz to 13.6 GHz
81.3 (82.2 dB typ)
–84.5 (–89.5 dBm typ)
± 0.29 dB (95%)
20 Hz to 3.6 GHz
± 1.17 dB (95%)
3.5 GHz to 8.4 GHz
± 1.54 dB (95%)
8.3 GHz to 13.6 GHz
76.9 (77.4 dB typ)
–82.5 (–86.5 dBm typ)
± 0.38 dB (95%)
9 kHz to 3.6 GHz
± 1.22 dB (95%)
3.5 GHz to 7.0 GHz
± 1.59 dB (95%)
6.9 GHz to 13.6 GHz
70.7 (75.9 dB typ)
–76.5 (–82.5 dBm typ)
± 0.81 dB (95%)
100 kHz to 3.0 GHz
± 1.80 dB (95%)
3.0 GHz to 7.5 GHz
Occupied bandwidth
Minimum power at RF input
Frequency accuracy
–30 dBm (nom)
± 10 kHz (RBW = 30 kHz, Number of points = 1001, Span = 10 MHz)
Modulation analysis
Input range
OSTP/RSTP ¹
Absolute accuracy
EVM loor for downlink (OFDMA) ²
± 0.21 dB (nom)
Signal level within one range step of overload
± 0.27 dB (nom)
± 0.30 dB (nom)
± 0.61 dB
Signal bandwidth
– 5 MHz
0.34% (–49.3 dB)
0.28% (–51.2 dB) nom
– 10 MHz
0.35% (–49.1 dB)
0.31% (–50.3 dB) nom
– 20 MHz
0.39% (–48.1 dB)
0.34% (–49.5 dB) nom
EVM loor for downlink (OFDMA) with Option BBA
0.36% (–48.8 dB)
0.36% (–48.8 dB)
0.40% (–47.9 dB)
0.68% (–43.3 dB)
0.68% (–43.6 dB)
0.72% (–43.0 dB)
0.63% (–44.0 dB) nom
0.64% (–43.8 dB) nom
0.70% (–43.0 dB) nom
Signal bandwidth
– 5 MHz
– 10 MHz
– 20 MHz
EVM accuracy for Downlink (OFDMA) ³
EVM range: 0 to 8%
EVM loor for uplink (SC-FDMA) ²
Signal bandwidth
– 5 MHz
– 10 MHz
– 20 MHz
0.18% (–54.8 dB) nom
0.18% (–54.8 dB) nom
0.18% (–54.8 dB) nom
0.18% (–54.8 dB) nom
0.18% (–54.8 dB) nom
0.18% (–54.8 dB) nom
± 0.3% nom
± 0.3% nom
± 0.3% nom
0.31% (–50.1 dB)
0.21% (–53.5 dB) nom
0.32% (–49.8 dB)
0.21% (–53.5 dB) nom
0.35% (–49.1 dB)
0.22% (–53.2 dB) nom
0.35% (–49.1 dB)
0.35% (–49.1 dB)
0.40% (–47.9 dB)
0.66% (–43.6 dB)
0.66% (–43.6 dB)
0.70% (–43.0 dB)
± 0.3% nom
0.60% (–44.4 dB) nom
0.61% (–44.2 dB) nom
0.63% (–44.0 dB) nom
1. The accuracy speciication applies when EVM is less than 1% and no power boost is applied on reference signal.
2. For MXA and EXA instruments with serial number preix ≥ MY/SG/US5233 and ≥ MY/SG/US5340, which ship standard with N9020A-EP2 and N9010A-EP3.
Refer to the LTE section in the MXA and EXA speciication guides for more information: www.keysight.com/ind/mxa_speciications; www.keysight.com/
ind/exa_speciications.
3. The accuracy speciication applies when the EVM to be measured is well above the measurement loor. When the EVM does not greatly exceed the loor, the
errors due to the loor add to the accuracy errors. Refer to speciication guide for information on calculating the errors due to the loor.