W9082B Datasheet, PDF (12/19 Pages) Keysight Technologies – X-Series Measurement Application

12 | Keysight | LTE and LTE-Advanced FDD/TDD X-Series Measurement Application - Technical Overview
Key Speciications
Deinitions
– Speciications describe the performance of parameters covered by the product warranty.
– The speciications apply to single carrier case only, unless otherwise stated.
– 95th percentile values indicate the breadth of the population (≈2σ) of performance tolerances expected to be met in 95% of cases
with a 95% conidence. These values are not covered by the product warranty.
– Typical values are designated with the abbreviation "typ." These are performance beyond speciication that 80% of the units
exhibit with a 95% conidence. These values are not covered by the product warranty.
– Nominal values are designated with the abbreviation "nom." These values indicate expected performance, or describe product
performance that is useful in the application of the product, but is not covered by the product warranty.
Note: Data subject to change.
Supported standards
Technology
Model-Option
Standard versions
Signal structure
Signal direction
Signal bandwidth
Number of component carriers
Physical signals
– Downlink
– Uplink
Physical channels
– Downlink
– Uplink
LTE FDD/TDD
N9080B/W9080B-1FP
N9082B/W9082B-1FP
36.211 V9.1.0 (March 2010)
36.212 V9.4.0 (September 2011)
36.213 V9.3.0 (September 2010)
36.214 V9.2.0 (June 2010)
36.141 V9.10.0 (July 2012)
36.521-1 V9.8.0 (March 2012)
FDD Frame Structure Type 1
TDD Frame Structure Type 2
Special subframe conigurations 0-8
Uplink and downlink
UL/DL conigurations 0-6
1.4 MHz (6 RB), 3 MHz (15 RB), 5 MHz (25 RB), 10 MHz
(50 RB), 15 MHz (75 RB), 20 MHz (100 RB)
1
LTE-Advanced FDD/TDD
N9080B/W9080B-2FP
N9082B/W9082B-2FP
36.211 V10.7.0 (March 2013)
36.212 V10.7.0 (December 2012)
36.213 V10.9.0 (March 2013)
36.214 V10.12.0 (March 2013)
36.141 V11.4.0 (March 2013)
36.521-1 V10.5.0 (March 2013)
FDD Frame Structure Type 1
TDD Frame Structure Type 2
Special subframe conigurations 0-9
Uplink and downlink
UL/DL conigurations 0-6
Bandwidth per component carrier:
1.4 MHz (6 RB), 3 MHz (15 RB), 5 MHz (25 RB),
10 MHz (50 RB), 15 MHz (75 RB), 20 MHz (100 RB)
1, 2, 3, 4, or 5
PBCH, PCFICH, PHICH, PDCCH, PDSCH, PMCH
PUCCH, PUSCH, PRACH
P-SS, S-SS, C-RS, UE-RS, P-PS (positioning), MBSFN-RS P-SS, S-SS, C-RS, UE-RS, P-PS (positioning), MBSFN-RS,
CSI-RS
PUCCH-DMRS, PUSCH-DMRS, S-RS (sounding)
PUCCH-DMRS, PUSCH-DMRS, S-RS (sounding)
For a complete list of speciications refer to the appropriate speciications guide.
PXA: http://www.keysight.com/find/pxa_specifications
MXA: http://www.keysight.com/find/mxa_specifications
EXA: http://www.keysight.com/find/exa_specifications
CXA: http://www.keysight.com/find/cxa_specifications