English
Language : 

ISL71841SEH Datasheet, PDF (6/29 Pages) Intersil Corporation – Radiation Hardened 30V 32-Channel Analog
◁
ISL71841SEH
Electrical Specifications (±15V) V+ = 15V, V- = -15V, VAH = 4.0V, VAL = 0.8V, VREF = VEN = 5.0V, TA= +25°C, unless otherwise noted.
Boldface limits apply across the operating temperature range, -55°C to +125°C or across a total ionizing dose of 300krad(Si) with exposure of a high
dose rate of 50 to 300krad(Si)/s or a total ionizing dose of 50krad(Si) with exposure at a low dose rate of <10mrad(Si)/s. (Continued)
SYMBOL
PARAMETER
TEST CONDITIONS
MIN
(Note 7) TYP
MAX
(Note 7)
UNIT
IS(OFF) POWER OFF Switch Off Leakage with Device
Powered Off
VIN = +25V, VEN/VA/VREF = 0V
V± = OPEN, TA = +25°C
TA = -55°C, +125°C
Post radiation
-10
-
10
nA
-10
-
80
nA
-100
-
100
nA
VIN = -25V, VEN/VA/VREF = 0V
V± = OPEN, TA = +25°C
TA = -55°C, +125°C
Post radiation
-10
-
10
nA
-80
-
10
nA
-100
-
100
nA
IS(ON) OVERVOLT Switch On Leakage Current Into VIN = +35V, VOUT = 0V, TA = +25°C, -55°C
-10
-
10
nA
the Source (overvoltage)
All unused switch inputs = GND,
V± = ±16.5V
TA = +125°C
Post radiation
-80
-
80
nA
-500
-
500
nA
VIN = -35V, VOUT = 0V, TA = +25°C, -55°C
-10
-
10
nA
All unused switch inputs = GND,
V± = ±16.5V
TA = +125°C
Post radiation
-20
-
20
nA
-500
-
500
nA
IS(OFF) OVERVOLT Switch Off Leakage Current Into VIN = +35V, VOUT = 0V, TA = +25°C, -55°C
-10
-
10
nA
the Source (overvoltage)
All unused switch inputs = GND,
V± = ±16.5V
TA = +125°C
Post radiation
-80
-
80
nA
-750
-
750
nA
VIN = -35V, VOUT = 0V, TA = +25°C, -55°C
-10
-
10
nA
All unused switch inputs = GND,
V± = ±16.5V
TA = +125°C
Post radiation
-20
-
20
nA
-750
-
750
nA
ID(OFF)
Switch Off Leakage
VOUT = V+ - 5V, all inputs = V- + 5V
V± = ±16.5V, TA = +25°C, -55°C
TA = +125°C
Post radiation
-10
-
10
nA
0
-
120
nA
-80
-
80
nA
VOUT = V- + 5V, all inputs = V+ - 5V
V± = ±16.5V, TA = +25°C, -55°C
TA = +125°C
Post radiation
-10
-
10
nA
-120
-
0
nA
-80
-
80
nA
ID(OFF) OVERVOLT Switch Off Leakage Current Into VOUT = 0V, VIN = +35V, V± = ±16.5V
-10
-
10
nA
the Drain (overvoltage)
All unused inputs are tied to GND
Post radiation
-500
-
500
nA
VOUT = 0V, VIN = -35V, V± = ±16.5V
All unused inputs are tied to GND
-10
-
10
nA
Post radiation
-500
-
500
nA
Submit Document Feedback
6
FN8735.4
June 3, 2016
 ▷