ISL71841SEH Datasheet, PDF (27/29 Pages) Intersil Corporation – Radiation Hardened 30V 32-Channel Analog

ISL71841SEH
Revision History The revision history provided is for informational purposes only and is believed to be accurate, but not warranted.
Please go to the web to make sure that you have the latest revision.
DATE
REVISION
CHANGE
June 3, 2016
FN8735.4
Updated Ordering information table on page 3 by updating first column and updating Note 3.
Updated bolding in Electrical Specification table and added test conditions to the Break-Before-Make Delay,
Enable Turn-On Time and Disable Turn-Off Time specifications.
Changed from “V_S” to “V±” in the titles of the Typical Performance, Post High and Post Low Dose Rate
Radiation Characteristics curve tables.
Changed units from mA to µA for Figures 31, 32, 33, 43, 44, 45, 55, 56, 57, 67, 68, 69
April 15, 2016
FN8735.3
Added ISL71841SEHVL and ISL71841SEHL/PROTO details to the Ordering Information table on page 3 and
added the applicable packaging information throughout datasheet.
Updated the heading for the Low Dose Rate Radiation Characteristics (Vs = ±15V) table on page 20 in third
sentence changed from “high” to “low”.
Updated the heading for the Low Dose Rate Radiation Characteristics (Vs = ±12V) table on page 22 in third
sentence changed from “high” to “low”.
December 11, 2015
September 29, 2015
FN8735.2
FN8735.1
Updated Y-axis labels on Figures 31 through 78.
Updated crosstalk and off Isolation MIN in Electrical Spec table on page 7 from -75 to 75 (off isolation) and
-47 to 47 (crosstalk).
Changed all instances of V_DD to V⁺ and V_SS to V^-.
Updated Related Literature on page 1.
Updated testing information for ESD tolerances, HBM, CDM and MM in
“Absolute Maximum Ratings” on page 5
From:
Human Body Model (Tested per MIL-PRF-883 3015.7)
Charged Device Model (Tested per MIL-PRF-883 3015.7)
Machine Model (Tested per MIL-PRF-883 3015.7)
To:
Human Body Model (Tested per MIL-STD-883 TM 3015)
Charged Device Model (Tested per JESD22-C101D)
Machine Model (Tested per JESD22-A115-A)
June 11, 2015
FN8735.0
Updated crosstalk and off Isolation MIN in Electrical Spec table on page 7 from -90 to -75 (off isolation) and
-47 (crosstalk)
Added Figures 26, 28 and 30 and updated figure titles for Figures 27 and 29 on page 14.
Updated top metalization thickness and composition in “Die Characteristics” on page 25.
Added Table 3 on page 26.
Initial Release
About Intersil
Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The company's products
address some of the largest markets within the industrial and infrastructure, mobile computing and high-end consumer markets.
For the most updated datasheet, application notes, related documentation and related parts, please see the respective product
information page found at www.intersil.com.
You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask.
Reliability reports are also available from our website at www.intersil.com/support.
For additional products, see www.intersil.com/en/products.html
Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted
in the quality certifications found at www.intersil.com/en/support/qualandreliability.html
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time
without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be
accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
Submit Document Feedback 27
FN8735.4
June 3, 2016