ISL6592 Datasheet, PDF (5/21 Pages) Intersil Corporation – 6-Phase Digital Multiphase Controller

ISL6592
D
Absolute Maximum Ratings
Supply Voltage (V_DD) . . . . . . . . . . . . . . . . . . . . . . . -0.50V to 4.25V
All pins except ISENx and ground . . . . . . . . . . . . . . -0.50V to 4.25V
All ISENx pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.50V to 3.0V
All ground pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.50V to 0.50V
Differential Voltage (V_{SEN_DIFF}) . . . . . . . . . . . . . . . . . . . . . . . . 2.5V
ESD Rating
Human Body Model (Per MIL-STD-883 Method 3015.7)
(100pF, 1.5kΩ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3,000V
Charged Device Model (Per EOS/ESD DS5.3, 4/14/93) . . 1,000V
Machine Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .300V
Thermal Information
Thermal Resistance (Typical, Note 1)
θ_JA (°C/W)
TQFP Package. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
48
Maximum Storage Temperature Range . . . . . . . . . . . -65°C to 150°C
Maximum Junction Temperature Range . . . . . . . . . . . 0°C to 125°C
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . . 300°C
Operating Conditions
Ambient Temperature Range . . . . . . . . . . . . . . . . . . . . . 0°C to 85°C
Supply Voltage Range (Typical). . . . . . . . . . . . . . . . +3.0V to +3.6V
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE:
1. θ_JA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
Electrical Specifications V_DD = +3.3V, T_C = +85°C, unless otherwise specified
PARAMETER
SYMBOL
TEST CONDITIONS
VDD SUPPLY
Nominal supply current
VID[5:0] INPUTS (Note 4)
I_VDD
VDD = +3.3V, ISEN[6:1] = -70µA
Input low voltage
Input high voltage
Input current (input voltage low)
Input current (input voltage high)
OUTEN INPUT
V_{IL_VID}
V_{IH_VID}
I_{IL_VID}
I_{IH_VID}
(Note 5)
VIN = 0.0V
VIN = 3.5V
Input low voltage
Input high voltage
Input current (input voltage low)
Input current (input voltage high)
LL[1:0] INPUTS
V_{IL_OE}
V_{IH_OE}
I_{IL_OE}
I_{IH_OE}
OE = 0.0V
OE = 3.5V
Input low voltage
Input high voltage
Input current (input voltage low)
Input current (input voltage high)
SDA, SCL INPUTS
V_{IL_LL}
V_{IH_LL}
I_{IL_LL}
I_{IH_LL}
LL(X) = 0.0V
LL(X) = 1.20V
Input low voltage
Input high voltage
Input current, input voltage low
Input current, input voltage high
Output low voltage
V_{IL_S}
V_{IH_S}
I_{IL_S}
I_{IH_S}
V_OL
VIN = 0.0V
VIN = 3.5V
Open drain output, I_LOAD = +5mA
MIN TYP MAX UNITS
100 140 mA
-0.3
0.4
V
0.8
5.5
V
-75
10 µA
-10
10 µA
-0.3
0.4
V
0.8
5.5
V
-75
10 µA
-10
10 µA
0.4
V
0.8
V
-20 -30 µA
15 25 µA
-0.3
0.8
V
2.4
5.5
V
-10
10 µA
-10
10 µA
0.4
V
5
FN9163.1
August 5, 2005