HC55120_06 Datasheet, PDF (36/36 Pages) Intersil Corporation – Low Power Universal SLIC Family

HC55120, HC55121, HC55130, HC55140, HC55142, HC55143, HC55150
Plastic Leaded Chip Carrier Packages (PLCC)
0.042 (1.07)
0.048 (1.22)
0.042 (1.07)
PIN (1)
0.056 (1.42)
IDENTIFIER
0.050 (1.27) TP
CL
ND
0.004 (0.10) C
0.025 (0.64)
0.045 (1.14)
R
D2/E2
E1 E ^CL
D2/E2
NE
VIEW “A”
0.020 (0.51) MAX
3 PLCS
D1
D
0.050 (1.27)
MIN
0.015 (0.38)
MIN
A1
A
-C-
SEATING
PLANE
0.026 (0.66)
0.032 (0.81)
0.025 (0.64)
MIN
0.013 (0.33)
0.021 (0.53)
(0.12)
0.005 ^{M A S - B S D S}
VIEW “A” TYP.
N32.45x55 (JEDEC MS-016AE ISSUE A)
32 LEAD PLASTIC LEADED CHIP CARRIER PACKAGE
INCHES
MILLIMETERS
SYMBOL MIN
MAX
MIN
MAX NOTES
A
0.125 0.140 3.18
3.55
-
A1
0.060 0.095 1.53
2.41
-
D
0.485 0.495 12.32 12.57
-
D1
0.447 0.453 11.36 11.50
3
D2
0.188 0.223 4.78
5.66
4, 5
E
0.585 0.595 14.86 15.11
-
E1
0.547 0.553 13.90 14.04
3
E2
0.238 0.273 6.05
6.93
4, 5
N
28
28
6
ND
7
7
7
NE
9
9
7
NOTES:
Rev. 0 7/98
1. Controlling dimension: INCH. Converted millimeter dimen-
sions are not necessarily exact.
2. Dimensions and tolerancing per ANSI Y14.5M-1982.
3. Dimensions D1 and E1 do not include mold protrusions. Al-
lowable mold protrusion is 0.010 inch (0.25mm) per side.
Dimensions D1 and E1 include mold mismatch and are mea-
sured at the extreme material condition at the body parting
line.
4. To be measured at seating plane -C- contact point.
5. Centerline to be determined where center leads exit plastic
body.
6. “N” is the number of terminal positions.
7. ND denotes the number of leads on the two shorts sides of the
package, one of which contains pin #1. NE denotes the num-
ber of leads on the two long sides of the package.
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
36
FN4659.13
June 1, 2006