TLE6270R Datasheet, PDF (9/35 Pages) Infineon Technologies AG – Quad Low Side Injector Driver

TLE6270R
Quad Low Side Injector Driver
General Product Characteristics
4
General Product Characteristics
4.1
Absolute Maximum Ratings
Absolute Maximum Ratings ¹⁾
T_J = -40 °C to +150 °C; all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Pos. Parameter
Symbol
Limit Values Unit Conditions
Min.
Max.
4.1.1 Supply voltage
Outputs
V_CC
-0.3
7
V
–
4.1.2 Continuous output voltage
V_OUT
-1.5
80
4.1.3 Continuous output current, one output I_OUTC
-5
5
active
V
–
A
–
4.1.4 Peak output current
4.1.5 Clamping energy repetitive pulse
4.1.6 Clamping energy single pulse
Inputs and NCTL, SDO outputs
I_OUTP
-10
W_OFFr
–
W_OFFs
–
20
A
see Chapter 5.5
30
mJ all T°, see Figure 4
130
mJ all T°, see Figure 4
4.1.7 Continuous voltage
All pins
ESD Susceptibility
V_IN
-0.3
7
V
–
4.1.8 Electrostatic discharge
V_ESD
-2000 2000
V
R = 1.5 kΩ;
C = 100 pF;
HBM²⁾
Operating Range
4.1.9 Operating Temperature Range
T_J
-40
4.1.10 Storage Temperature Range
T_J
-55
1) Not subject to production test, specified by design.
2) ESD susceptibility, HBM according to EIA/JESD 22-A114B
150
°C
1)
150
°C
1)
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
P
240 W
100ns
90%
f=1 kHz
P
520 W
100ns
90%
10%
250 us
t
10%
500 us
t
Figure 4 Energy Repetitive Pulse and Energy Single Pulse
Data Sheet
9
V1.3, 2008-12-23