English
Language : 

TLE6270R Datasheet, PDF (23/35 Pages) Infineon Technologies AG – Quad Low Side Injector Driver
TLE6270R
Quad Low Side Injector Driver
Electrical Characteristics
6.3
Outputs
Electrical Characteristics: Serial Data Output (SDO)
VCC = 4.5 V to 5.5 V, TCASE = -40 °C to +125 °C, all voltages with respect to ground, positive current flowing into
pin (unless otherwise specified)
Pos. Parameter
Symbol
Limit Values
Unit Conditions
Min. Typ. Max.
6.3.1 High output level
VSDOH
VCC - –
–
V
ISDO = -2 mA
0.4
6.3.2
6.3.3
Low output level
Tristate leakage current
VSDOL
–
–
ISDOL
-10
–
0.4
V
ISDO = 3.2 mA
10
µA NCS = HIGH;
VSDO = 0 … VCC
Electrical Characteristics: Control HS Outputs (NCTLx)
VCC = 4.5 V to 5.5 V, TCASE = -40 °C to +125 °C, all voltages with respect to ground, positive current flowing into
pin (unless otherwise specified)
Pos. Parameter
Symbol
Limit Values
Unit Conditions
Min. Typ. Max.
6.3.4
6.3.5
6.3.6
6.3.7
High output level
Low output level
Peak current at L → H transition
Peak current at H → L transition
VNCTLH
VCC - 1 –
VNCTLL
–
–
IP_NCTL_LH –
–
IP_NCTL_HL 40
–
–
V
INCTL = -10 mA
0.1
V
INCTL = 1 mA
-35
mA
VNCTL = VCC - 4 V
–
mA
VNCTL = 4 V
Electrical Characteristics: Power Outputs (OUTx)
VCC = 4.5 V to 5.5 V, TCASE = -40 °C to +125 °C, all voltages with respect to ground, positive current flowing into
pin (unless otherwise specified)
Pos. Parameter
Symbol
Limit Values
Unit Conditions
6.3.8 ON resistance at VCC = 5 V
RDSON1
Min.
–
6.3.9 Clamp voltage
VCLP1
80
6.3.10 Clamp voltage at -1 A on neighbor VCLPR –
output
Typ.
–
87
–
Max.
300 mΩ
94
V
94
V
1)
Iout = 5 A;
VCC = 5 V;
Tj = 150 °C
1)
IOUT = 4 A
test current 100 mA
6.3.11 Matching clamp voltage
VCLPM
VCLP - 7 –
VCLP + V
–
7
6.3.12 Leakage current
IOUTL
–
6.3.13 Neg. output voltage ramp
OVRn
–
(75% × Vbat … 25% × Vbat, inductive
load)
–
10
µA
VOUT = 18 V
20
100 V/µs see Chapter 7.2
1)2)
6.3.14 Pos. output voltage ramp
OVRp
–
(25% × Vbat … 70 V, inductive load)
100 200 V/µs see Chapter 7.2
1)2)3)
Data Sheet
23
V1.3, 2008-12-23