TLE6270R Datasheet, PDF (22/35 Pages) Infineon Technologies AG – Quad Low Side Injector Driver

TLE6270R
Quad Low Side Injector Driver
Electrical Characteristics
6
Electrical Characteristics
6.1
Supply Current
Electrical Characteristics: Supply Current
V_CC = 4.5 V to 5.5 V, T_CASE = -40 °C to +125 °C, all voltages with respect to ground, positive current flowing into
pin (unless otherwise specified)
Pos. Parameter
Symbol
Limit Values
Unit Conditions
Min. Typ. Max.
6.1.1
6.1.2
Standby current
Operating mode
I_{CC_STB}
–
–
10
mA without load
I_{CC_OM}
–
–
20
mA I_out = 4 A on two
outputs
6.1.3 Operating mode and reverse I_{CC_OM_REV} –
–
20
mA I_outp = -1 A on one
output current
output,
I_out = 4 A on two
other outputs
6.2
Inputs
Electrical Characteristics: Inputs (NONx, PChx, NRESx, NCS, CLK, SDI, HS_Diag)
V_CC = 4.5 V to 5.5 V, T_CASE = -40 °C to +125 °C, all voltages with respect to ground, positive current flowing into
pin (unless otherwise specified)
Pos. Parameter
Symbol
Limit Values
Unit Conditions
Min. Typ. Max.
6.2.1 Low level
High Level
V_INL
-0.3 –
0.2 × V
–
V_CC
6.2.2 All inputs except HS_Diag
6.2.3 HS_Diag
Hysteresis
V_INH
0.7 × –
V_CC
V_{HS_DiagH} 0.3 × –
V_CC
V_CC + V
–
0.3
7
V
–
6.2.4 NONx, Pchx, NRESx
6.2.5 NCS, CLK, SDI
Input Current
V_HYST
0.85 –
–
V
–
V_{HYST_SPI} 0.2
–
–
V
–
6.2.6 All inputs except HS_Diag
I_IN
pull-up current
-100 –
-20
µA
0 < V_IN < 0.9 V_CC
6.2.7 HS_Diag pull-down current
I_IN
6.2.8 ∆I_IN during reverse output
I_IN
current
20
–
-200 –
100
µA
500 mV < V_IN < V_CC
200
µA
I_outp = -1 A on one
output
Data Sheet
22
V1.3, 2008-12-23