C868 Datasheet, PDF (72/82 Pages) Infineon Technologies AG – 8-Bit Single-Chip Microcontroller

C868
5) _{IDDP (idle mode) is measured with all output pins disconnected and with all peripheral disabled:}
XTAL2 driven with t_R, t_F = 5 ns, V_IL1,V_IL2 = V_SSP + 0.5 V, V_IH1,V_IH2 = V_DDP – 0.5 V; XTAL1 = N.C.;
RESET = V_DDP; all other pins are disconnected.
6) _{IDDP (active mode with slow down mode) is measured with all output pins disconnected:}
XTAL2 driven with t_R, t_F = 5 ns, V_IL1,V_IL2 = V_SSP + 0.5 V, V_IH1,V_IH2 = V_DDP – 0.5 V; XTAL1 = N.C.;
RESET = V_DDP; all other pins are disconnected; the microcontroller is put into slow-down mode by software
with the slow-down clock set to 1/32 of system clock.
7) _{IDDP (idle mode with slow down mode) is measured with all output pins disconnected and with all peripheral}
disabled:
XTAL2 driven with t_R, t_F = 5 ns, V_IL1,V_IL2 = V_SSP + 0.5 V, V_IH1,V_IH2 = V_DDP – 0.5 V; XTAL1 = N.C.;
RESET = V_DDP; all other pins are disconnected; the microcontroller is put into slow-down mode by software
with the slow-down clock set to 1/32 of system clock.
8) _{IPDC and IPDP (power-down mode) are measured under the following conditions:}
RESET = V_DDP; XTAL2 = V_SSC; XTAL1 = N.C.; V_AGND= V_SSP; V_AREF= V_DDP; RxD/INT0 = V_DDP; all other pins
are set to input and connected to gnd; ALE output disabled and connected to gnd.
Data Sheet
72
V 1.0, 2003-05