C868 Datasheet, PDF (68/82 Pages) Infineon Technologies AG – 8-Bit Single-Chip Microcontroller

C868
Operating Conditions
The following operating conditions must not be exceeded in order to ensure correct
operation of the C868. All parameters specified in the following sections refer to these
operating conditions, unless otherwise noticed.
Operating Condition Parameters
Parameter
Symbol
Limit Values Unit Notes
min.
max.
Digital supply voltage V_DDP
3.0
3.6
V Active mode,
f_SYSmax = 40 MHz
tbd
3.6
V PowerDown
mode¹⁾
Digital ground
V_SSC,V_SSP
0
V-
voltages
Ambient temperature T_A
-40
85
°C SAF-C868...
-40
125
°C SAK-C868...
Analog reference
voltage
V_AREF
3.0V
V_DDP + V -
0.1
Analog ground
voltage
V_AGND
V_SSP - 0.1 V_SSP + V -
0.1
Analog input voltage
External Clock
Input current on any
pin during overload
condition except int/
analog and XTAL
int/analog pin
XTAL pin
Absolute sum of all
input currents during
overload condition
V_AIN
f_OSC
Ι_OV0
Ι_OV1
Ι_OV2
ΣΙ_OV
V_AGND
6.67
-5
V_AREF
10.67
5
V-
MHz -
mA -²⁾³⁾
-2
5
mA -³⁾⁴⁾
-5
5
mA -³⁾⁵⁾
-
|20|
mA -³⁾
Notes:
1) _{Oscillator or external clock disabled.}
2) _{Overload conditions under operating conditions occur if the voltage on the respective pin exceeds the}
specified operating range (i.e. V_OV > V_DDP +0.5V or V_OV < V_SSP -0.5V). The absolute sum of input currents
on all port pins may not exceed 20mA. The suply voltages V_DDP and V_SSP must remain within the specified
limits.
3) _{Not 100% tested, but guaranteed by design characterization.}
Data Sheet
68
V 1.0, 2003-05