HYS72D32300GBR Datasheet, PDF (6/38 Pages) Infineon Technologies AG – 184-Pin Registered Double Data Rate SDRAM Module

HYS72D[128/64/32][300/320]GBR–[5/6]–C
Registered Double Data Rate SDRAM
Overview
1
Overview
1.1
Features
• 184-Pin Registered 8-Byte Dual-In-Line
DDR SDRAM Module for “1U” PC, Workstation and Server main memory applications
• One rank 32 M × 72 and 64M × 72 and two ranks 64 M ×72 and 128 M ×72 organization
• JEDEC standard Double Data Rate Synchronous DRAMs (DDR SDRAM) with a single + 2.5 V (± 0.2 V) power
supply and + 2.6 V (± 0.1 V) power supply for DDR400
• Built with 256-Mbit DDR SDRAMs in P-TFBGA-60-1 packages
• Programmable CAS Latency, Burst Length, and Wrap Sequence (Sequential & Interleave)
• Auto Refresh (CBR) and Self Refresh
• All inputs and outputs SSTL_2 compatible
• Re-drive for all input signals using register and PLL devices.
• Serial Presence Detect with E²PROM
• Low Profile Modules form factor:
133.35 mm × 28.58 mm × 4.00 mm / 2.64 mm and for 1GB 133.35 mm × 30.48 mm (1.2”)× 4.00 mm
• JEDEC standard reference layout for one rank 256 MB, 512 MB and two ranks 512 MB, 1 GB:
PC2700 and PC3200 Registered DIMM Raw Cards A,B,C,D
• Gold plated contacts
Table 1 Performance
Part Number Speed Code
Speed Grade
max. Clock Frequency
Component
Module
@CL3
@CL2.5
@CL2
f_CK3
f_CK2.5
f_CK2
–5
DDR400B
PC3200–3033
200
166
133
–6
DDR333B
PC2700–2533
166
166
133
Unit
—
—
MHz
MHz
MHz
1.2
Description
The HYS72D[128/64/32][300/320]GBR–[5/6]–C and HYS72D64320GBR–5–C are low profile versions of the
standard Registered DIMM modules suitable for 1U Server Applications. The Low Profile DIMM versions are
available as 32 M ×72 (256 MB), 64 M ×72 (512 MB) and 128 M ×72 (1 GB)
The memory array is designed with Double Data Rate Synchronous DRAMs for ECC applications. All control and
address signals are re-driven on the DIMM using register devices and a PLL for the clock distribution. This reduces
capacitive loading to the system bus, but adds one cycle to the SDRAM timing. A variety of decoupling capacitors
are mounted on the PC board. The DIMMs feature serial presence detect based on a serial E²PROM device using
the 2-pin I²C protocol. The first 128 bytes are programmed with configuration data and the second 128 bytes are
available to the customer.
Data Sheet
6
Rev. 1.0, 2004-03
07302003-2MI6-FOP1