XC2734X Datasheet, PDF (22/106 Pages) Infineon Technologies AG – 16/32-Bit Single-Chip Microcontroller with 32-Bit Performance

XC2734X
XC2000 Family / Value Line
General Device Information
Table 5
Pin Definitions and Functions (cont’d)
Pin Symbol
Ctrl. Type Function
53 P10.10
O0 / I St/B Bit 10 of Port 10, General Purpose Input/Output
U0C0_SELO O1 St/B USIC0 Channel 0 Select/Control 0 Output
0
CCU60_COU O2 St/B CCU60 Channel 3 Output
T63
U0C0_DX2C I
St/B USIC0 Channel 0 Shift Control Input
U0C1_DX1A I
St/B USIC0 Channel 1 Shift Clock Input
TDI_B
IH St/B JTAG Test Data Input
If JTAG pos. B is selected during start-up, an
internal pull-up device will hold this pin high when
nothing is driving it.
54 P10.11
O0 / I St/B Bit 11 of Port 10, General Purpose Input/Output
U1C0_SCLK O1 St/B USIC1 Channel 0 Shift Clock Output
OUT
BRKOUT
O2 St/B OCDS Break Signal Output
U1C0_DX1D I
St/B USIC1 Channel 0 Shift Clock Input
TMS_B
IH St/B JTAG Test Mode Selection Input
If JTAG pos. B is selected during start-up, an
internal pull-up device will hold this pin high when
nothing is driving it.
55 P10.12
O0 / I St/B Bit 12 of Port 10, General Purpose Input/Output
U1C0_DOUT O1 St/B USIC1 Channel 0 Shift Data Output
TDO_B
OH / St/B JTAG Test Data Output / DAP1 Input/Output
IH
If DAP pos. 1 is selected during start-up, an
internal pull-down device will hold this pin low
when nothing is driving it.
U1C0_DX0C I
St/B USIC1 Channel 0 Shift Data Input
U1C0_DX1E I
St/B USIC1 Channel 0 Shift Clock Input
56 P10.13
O0 / I St/B Bit 13 of Port 10, General Purpose Input/Output
U1C0_DOUT O1 St/B USIC1 Channel 0 Shift Data Output
U1C0_SELO O3 St/B USIC1 Channel 0 Select/Control 3 Output
3
U1C0_DX0D I
St/B USIC1 Channel 0 Shift Data Input
Data Sheet
22
V1.3, 2010-04