82V3012 Datasheet, PDF (19/32 Pages) Integrated Device Technology – T1/E1/OC3 WAN PLL WITH DUAL REFERENCE INPUTS

IDT82V3012
T1/E1/OC3 WAN PLL WITH DUAL REFERENCE INPUTS
4
ABSOLUTE MAXIMUM RATINGS
Ratings
Min.
Power supply voltage
-0.5
Voltage on any pin with respect to ground
-0.5
Package power dissipation
Storage temperature
-55
Max.
Unit
5.0
V
5.5
V
200
mW
125
°C
Note: Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended
periods may affect reliability.
5
RECOMMENDED DC OPERATING CONDITIONS
Parameter
Min.
Operating temperature
-40
Power supply voltage
3.0
Max.
Unit
+85
°C
3.6
V
6
DC ELECTRICAL CHARACTERISTICS
6.1
SINGLE END INPUT/OUTPUT PORT
Parameter
I_DDS
I_DD
V_CIH
V_CIL
V_TIH
V_TIL
I_IL
V_OH
V_OL
Description
Supply current with OSCi = 0 V
Supply current with OSCi = Clock
CMOS high-level input voltage
CMOS low-level input voltage
TTL high-level input voltage
TTL low-level input voltage
Input leakage current:
Normal (low level)
Normal (high level)
Pull up (low level)
Pull up (high level)
Pull down (low level)
Pull down (high level)
High-level output voltage
Low-level output voltage
Min.
Typ.
0.7V_DDD
2.0
-15
-15
-100
-15
-15
0
2.4
* Note:
1. Voltages are with respect to ground (V_SS) unless otherwise stated.
2. Supply voltage and operating temperature are as per Recommended Operating Conditions.
Max.
10
60
0.3V_DDD
0.8
15
15
0
15
15
100
0.4
Units
mA
mA
V
V
V
V
Test Conditions *
Outputs unloaded
Outputs unloaded
OSCi, Fref0 and Fref1
OSCi, Fref0 and Fref1
All input pins except for OSCi, Fref0 and Fref1
All input pins except for OSCi, Fref0 and Fref1
µA V_I = V_DDD or 0 V
V
I_OH = 8 mA
V
I_OL = 8 mA
Absolute Maximum Ratings
19
February 6, 2009