IC-MSB Datasheet, PDF (5/29 Pages) IC-Haus GmbH – SIN/COS SIGNAL CONDITIONER WITH 1Vpp DRIVER

iC-MSB^SAFETY, iC-MSB2
SIN/COS SIGNAL CONDITIONER WITH 1Vpp DRIVER
Rev D2, Page 5/29
ABSOLUTE MAXIMUM RATINGS
These ratings do not imply operating conditions; functional operation is not guaranteed. Beyond these ratings device damage may occur.
Item Symbol Parameter
No.
Conditions
Min.
Unit
Max.
G001 V()
Voltage at VDD, GND, PC, NC, PS, NS,
PZ, NZ, ACO
-6
6
V
G002 V()
Voltage at ERR
-6
8
V
G003 V()
Pin-To-Pin Voltage between VDD,
GND, PC, NC, PS, NS, PZ, NZ, ACO,
ERR
6
V
G004 V()
Voltage at X1...X6, SCL, SDA
-0.3 VDDS + V
0.3
G005 I(VDD) Current in VDD
-100
100
mA
G006 I()
Current in VDDS, GNDS
-50
50
mA
G007 I()
Current in X1...X6, SCL, SDA, ERR,
PC, NC, PS, NS, PZ, NZ
-20
20
mA
G008 I(ACO) Current in ACO
-100
20
mA
G009 Vd()
ESD Susceptibility at all pins
HBM 100 pF discharged through 1.5 kΩ
2
kV
G010 Ptot
Permissible Power Dissipation
TSSOP20
TSSOP20-TP
300
mW
400
mW
G011 Tj
Junction Temperature
-40
150
°C
G012 Ts
Storage Temperature Range
-40
150
°C
THERMAL DATA
Item Symbol
No.
T01 Ta
T02 Rthja
T03 Rthja
Parameter
Conditions
Operating Ambient Temperature Range iC-MSB TSSOP20, iC-MSB2 TSSOP20
iC-MSB TSSOP20-TP
Thermal Resistance Chip to Ambient TSSOP20 surface mounted to PCB
according to JEDEC 51
Thermal Resistance Chip to Ambient TSSOP20-TP surface mounted to PCB
according to JEDEC 51
Unit
Min. Typ. Max.
-25
100 °C
-40
115 °C
80
K/W
35
K/W
All voltages are referenced to Pin GNDS unless otherwise stated.
All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.