IC-MSB Datasheet, PDF (3/29 Pages) IC-Haus GmbH – SIN/COS SIGNAL CONDITIONER WITH 1Vpp DRIVER

iC-MSB^SAFETY, iC-MSB2
SIN/COS SIGNAL CONDITIONER WITH 1Vpp DRIVER
CONTENTS
Rev D2, Page 3/29
PACKAGES
4 SIGNAL PATH MULTIPLEXING: iC-MSB^SAFETY 18
ABSOLUTE MAXIMUM RATINGS
THERMAL DATA
ELECTRICAL CHARACTERISTICS
PROGRAMMING
5 ^{EXTENDED SIGNAL PATH MULTIPLEXING:}
iC-MSB2 ^{( not for safety applications )}
19
5
SIGNAL CONDITIONING CH1, CH2
21
6
Gain Settings CH1, CH2 . . . . . . . . . . . . 21
Offset Calibration CH1, CH2 . . . . . . . . . 22
10
Phase Correction CH1 vs. CH2 . . . . . . . . 22
SERIAL CONFIGURATION INTERFACE
(EEPROM)
SIGNAL CONDITIONING CH0
23
13
Gain Settings CH0 . . . . . . . . . . . . . . . 23
Example of CRC Calculation Routine . . . . . 13
Offset Calibration CH0 . . . . . . . . . . . . . 23
EEPROM Selection . . . . . . . . . . . . . . 13
I²C Slave Mode (ENSL = 1) . . . . . . . . . . 14 ^{SIGNAL LEVEL CONTROL and SIGNAL}
MONITORING
24
BIAS SOURCE AND TEMPERATURE
SENSOR CALIBRATION
15 ^{ERROR MONITORING AND ALARM OUTPUT 25}
Error Protocol . . . . . . . . . . . . . . . . . . 25
OPERATING MODES
16
I/O pin ERR . . . . . . . . . . . . . . . . . . . 25
Calibration Op. Modes . . . . . . . . . . . . . 16
TEMPERATURE MONITORING
26
Special Device Test Functions . . . . . . . . 16
Signal Filter . . . . . . . . . . . . . . . . . . . 16 _{REVERSE POLARITY PROTECTION}
26
TEST MODE
17 APPLICATION HINTS
27
INPUT CONFIGURATIONS
Connecting MR sensor bridges for
18
safety-related applications . . . . . . . . 27
Input Configurations . . . . . . . . . . . . . . 18
PLC Operation . . . . . . . . . . . . . . . . . 27