English
Language : 

HMT312S6BFR6C-G7 Datasheet, PDF (23/54 Pages) Hynix Semiconductor – 204pin DDR3 SDRAM SODIMM
AC & DC Output Measurement Levels
Single Ended AC and DC Output Levels
Table below shows the output levels used for measurements of single ended signals.
Single-ended AC and DC Output Levels
Symbol
VOH(DC)
VOM(DC)
VOL(DC)
VOH(AC)
VOL(AC)
Parameter
DC output high measurement level (for IV curve linearity)
DC output mid measurement level (for IV curve linearity)
DC output low measurement level (for IV curve linearity)
AC output high measurement level (for output SR)
AC output low measurement level (for output SR)
DDR3-800, 1066,
1333 and 1600
0.8 x VDDQ
0.5 x VDDQ
0.2 x VDDQ
VTT + 0.1 x VDDQ
VTT - 0.1 x VDDQ
Unit Notes
V
V
V
V
1
V
1
Notes:
1. The swing of ‚ 1 x VDDQ is based on approximately 50% of the static single ended output high or low
swing with a driver impedance of 40ʃ and an effective test load of 25ʃ to VTT = VDDQ / 2.
Differential AC and DC Output Levels
Table below shows the output levels used for measurements of single ended signals.
Differential AC and DC Output Levels
Symbol
Parameter
DDR3-800, 1066,
1333 and 1600
Unit Notes
VOHdiff (AC) AC differential output high measurementlevel (for output SR)
VOLdiff (AC) AC differential output low measurement level (for output SR)
+ 0.2 x VDDQ
- 0.2 x VDDQ
V
1
V
1
Notes:
1. The swing of ‚  x VDDQ is based on approximately 50% of the static differential output high or low
swing with a driver impedance of 40ʃ and an effective test load of 25ʃ to VTT = VDDQ/2 at each of the
differential outputs.
Rev. 0.2 / Feb. 2010
23