MB85R1002_07 Datasheet, PDF (6/15 Pages) Fujitsu Component Limited. – Memory FRAM CMOS 1 M Bit (64 K × 16)

MB85R1002
■ ABSOLUTE MAXIMUM RATINGS
Parameter
Rating
Symbol
Unit
Min
Max
Supply Voltage*
VCC
−0.5
+4.0
V
Input Voltage*
VIN
−0.5
VCC + 0.5
V
Output Voltage*
VOUT
−0.5
VCC + 0.5
V
Ambient Operating Temperature
TA
−20
+85
o_C
Storage Temperature
Tstg
−40
+125
o_C
* : All voltages are referenced to GND.
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
■ RECOMMENDED OPERATING CONDITIONS
Parameter
Symbol
Supply Voltage*
VCC
Input Voltage (high)*
VIH
Input Voltage (low)*
VIL
Ambient Operating Temperature
TA
Min
3.0
VCC × 0.8
−0.5
− 20
Value
Typ
3.3
⎯
⎯
⎯
Max
3.6
VCC + 0.5
+0.6
+85
Unit
V
V
V
o_C
* : All voltages are referenced to GND.
WARNING:
The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.Always use semiconductor devices within their recommended operating
condition ranges. Operation outside these ranges may adversely affect reliability and could result in
device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
6