MB15U36 Datasheet, PDF (5/23 Pages) Fujitsu Component Limited. – Dual PLL Frequency Synthesizer with On-Chip Prescaler

Dual PLL Frequency Synthesizer with On-Chip Prescaler
Absolute Maximum Ratings
Parameter
Symbol
Rating
Unit
Note
Power supply voltage
Input voltage
Output voltage
Storage temperature
Vcc_1,2
–0.5 to +6.5
V
Vp_1,2
–0.5 to +6.5
V
V_I
–0.5 to +6.5
V
V_O
–0.5 to +6.5
V
T_STG
–55 to +125
°C
WARNING: Semiconductor devices can be permanently damaged by the application of stress (voltage, current, temperature, etc.) in excess of absolute maximum ratings. Do not exceed
these ratings.
Recommended Operating Conditions
Parameter
Symbol
Min.
Power supply voltage
Vcc
3.0
Vp
3.0
Input voltage
V_I
GND
Operating temperature
Ta
–40
Value
Typ.
5.0
5.0
–
–
Unit
Note
Max.
5.5
V
Vcc₁ = Vcc₂
5.5
V
Vcc₁ = Vcc₂ *1
V_CC
V
+85
°C
*1: Prescaler divide ratio is only 64/65 (SW = “L”) at RF1.
WARNING: Recommended operating conditions are normal operating ranges for the semiconductor device. All the device’s electrical characteristics are warranted when operated within these
ranges.
Always use semiconductor devices within the recommended operating conditions. Operation outside these ranges may adversely affect reliability and could result in device
failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on the data sheet. Users considering application outside the listed conditions
are advised to contact their Fujitsu representative beforehand.
Handling Precautions
• This device should be transported and stored in anti-static containers
• This is a static-sensitive device; take proper anti-ESD precautions. Ensure that personnel and equipment are properly grounded.
Cover workbenches with grounded conductive mats.
• Always turn the power supply off before inserting or removing the device from its socket.
• Protect leads with a conductive sheet when handling or transporting PC boards with devices.
6 Fujitsu Microelectronics, Inc.