MC9S12DT128_1002 Datasheet, PDF (102/140 Pages) Freescale Semiconductor, Inc – Device User Guide

Device User Guide — 9S12DT128DGV2/D V02.17
Table A-6 5V I/O Characteristics
Conditions are shown in (Table A-4) unless otherwise noted
Num C
Rating
1 P Input High Voltage
T Input High Voltage
2 P Input Low Voltage
T Input Low Voltage
3 C Input Hysteresis
Input Leakage Current (pins in high ohmic input
4 P ^mode)
V_in = V_DD5 or V_SS5
Output High Voltage (pins in output mode)
5 C ^{Partial Drive IOH = –2.0mA}
P _{Full Drive IOH = –10.0mA}
Output Low Voltage (pins in output mode)
6 C ^{Partial Drive IOL = +2.0mA}
P _{Full Drive IOL = +10.0mA}
Internal Pull Up Device Current,
7 P _{tested at VIL Max.}
Internal Pull Up Device Current,
8 C _{tested at VIH Min.}
Internal Pull Down Device Current,
9 P _{tested at VIH Min.}
Internal Pull Down Device Current,
10 C _{tested at VIL Max.}
11 D Input Capacitance
Injection current¹
12 T _{Single Pin limit}
Total Device Limit. Sum of all injected currents
13 P _{Port H, J, P Interrupt Input Pulse filtered} ²
14 P _{Port H, J, P Interrupt Input Pulse passed} ²
NOTES:
1. Refer to Section A.1.4 Current Injection, for more details
2. Parameter only applies in STOP or Pseudo STOP mode.
Symbol
V_IH
V_IH
V_IL
V_IL
V_HYS
Min
0.65*V_DD5
–
–
V_SS5 – 0.3
I_in
-1.0
V_OH
V_DD5 – 0.8
V_OL
–
I_PUL
I_PUH
I_PDH
I_PDL
C_in
I_ICS
I_ICP
t_PULSE
t_PULSE
–
–10
–
10
–2.5
–25
10
Typ
–
–
–
–
250
–
–
–
–
–
–
–
6
–
Max
Unit
V
V_DD5 + 0.3
0.35*V_DD5
V
–
V
mV
1.0
µA
–
V
0.8
V
–130
µA
–
µA
130
µA
–
µA
–
pF
2.5
mA
25
3
µs
µs
A.1.10 Supply Currents
This section describes the current consumption characteristics of the device as well as the conditions for
the measurements.
104
Freescale Semiconductor