AK4115-A Datasheet, PDF (18/32 Pages) Asahi Kasei Microsystems – Evaluation Board Rev.3

ASAHI KASEI
[AKD4115-A]
6-1. [OPEN] buttons on left side and [START] buttons
(1) Click [OPEN] button and select the sequence file (*.aks) saved by [Function3].
The sequence file name is displayed as shown in Figure 11. ( In case that the selected sequence file name is
“DAC_Stereo_ON.aks”)
Figure 7. [F4] window(2)
(2) Click [START] button, then the sequence is executed.
6-2. [SAVE] and [OPEN] buttons on right side
[SAVE] : The name assign of sequence file displayed on [Function4] window can be saved to the file.
The extension of the file is “*.ak4”.
[OPEN] : The name assign of sequence file(*.ak4) saved by [SAVE] is loaded.
6-3. Note
(1) This function doesn't support the pause function of sequence function.
(2) All files used by [SAVE] and [OPEN] function on right side need to be in the same folder.
(3) When the sequence is changed in [Function3], the sequence file (*.aks) should be loaded again in order to reflect the
change.
<KM076403>
- 18 -
2006/08