AK4115-A Datasheet, PDF (12/32 Pages) Asahi Kasei Microsystems – Evaluation Board Rev.3

ASAHI KASEI
„ Jumper set up.
No. Jumper Name
1
D3V/VD
2
RXP0
3
RXN0
4,5,6 RX1-3
7,8,9,10 RX4-7
DIR MCLK ,
11,12
DIT MCLK
13 TX0
14 TXN1
15 MCLK
16,17 ELRCK
18 SDA/CDTO
19 TXP1
Function
Set-up of Power supply source for 74AC245.
D3V : D3V (default)
VD : VD
Set-up of RXP0 input circuit.
OPT : Optical (default)
XLR : XLR
BNC : BNC
Set-up of RXP0 input circuit.
OPT : Optical (default)
BNC : BNC
Set-up of RX1-3 input circuit.
RX4-7 set-up depending serial/parallel mode
RX4-7 : Serial mode (default)
DIF2-0,IPS0 : Parallel mode
MCKO set-up for PORT5(DIT) and PORT2(DIR)
MCKO1 : MCKO1 of AK4115 (default)
MCKO2 : MCKO2 of AK4115
Set-up of TX0 output circuit.
OPT : Optical
BNC : BNC (default)
Set-up of TXN1 output circuit.
XLR : XLR
BNC : BNC (default)
MCLK input output selection of PORT5(DIT).
MCKO : MCKO (default)
EMCK : EMCK
Set-up of ELRCK input signal.
AC : AC
DC : DC (default)
Set-up of SDA/CDTO pin.
4 wire Serial : CDTO/CM0=“H” (default)
IIC : SDA
Set-up of TXP1 input circuit.
OPT : Optical (default)
XLR : XLR
BNC : BNC
[AKD4115-A]
<KM076403>
- 12 -
2006/08