AK4115-A Datasheet, PDF (1/32 Pages) Asahi Kasei Microsystems – Evaluation Board Rev.3

ASAHI KASEI
[AKD4115-A]
AKD4115-A
AK4115 Evaluation Board Rev.3
GENERAL DESCRIPTION
AKD4115 is the evaluation board for AK4115, 192kHz digital audio transceiver. This board has optical,
cannon connector (XLR), and BNC connectors to interface with other digital audio equipment.
„ Ordering guide
AKD4115-A ---
Evaluation board for AK4115
(A cable for connecting the printer port (parallel port) of IBM-AT compatible PC
and control software are packed with this document. Please note that the control
software does not operate on Windows NT)
FUNCTION
† Digital interface
-S/PDIF :
8 channel input (optical, BNC or XLR)
2 channel output (optical, BNC or XLR)
- Serial audio data I/F :
1 input (for DIT data input. 10-pin port)
1 output (for DIR data output. 10-pin port)
-B,C,U,V bit :
1 input/output port (10-pin port)
-Serial control data I/F
1 input/output port (10-pin port)
Opt
RX0
5V REG
3.3V
GND
Control
RX1
RX7
Opt
TX0
TX1
AK4115
B,C,U,V
Serial Data in
(To DIT)
Serial Data out
(From DIR
Figure 1. AKD4115-A Block Diagram
*Circuit diagram and PCB layout are attached at the end of this manual.
<KM076403>
-1-
2006/08