XRT75L04 Datasheet, PDF (9/57 Pages) Exar Corporation – FOUR CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER

REV. 1.0.4
XRT75L04
FOUR CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER ATTENUATOR
RECEIVE INTERFACE
PIN #
SIGNAL NAME
78
RxCLK_0
71
RXCLK_1
143
RxCLK_2
150
RxCLK_3
80
RPOS_0
73
RPOS_1
141
RPOS_2
148
RPOS_3
79 RNEG_0/LCV_0
72 RNEG_1/LCV_1
142 RNEG_2/LCV_2
149 RNEG_3/LCV_3
97
RRING_0
106
RRING_1
124
RRING_2
115
RRING_3
98
RTIP_0
107
RTIP_1
123
RTIP_2
114
RTIP_3
TYPE
O
O
O
I
I
DESCRIPTION
Receive Clock Output - Channel 0:
Receive Clock Output - Channel 1:
Receive Clock Output - Channel 2:
Receive Clock Output - Channel 3:
By default, RPOS and RNEG data sampled on the rising edge RxCLK..
Set the RxCLKINV bit to sample RPOS/RNEG data on the falling edge of
RxCLK
Receive Positive Data Output - Channel 0:
Receive Positive Data Output - Channel 1:
Receive Positive Data Output - Channel 2:
Receive Positive Data Output - Channel 3:
NOTE: If the B3ZS/HDB3 Decoder is enabled in Single-rail mode, then the zero
suppression patterns in the incoming line signal (such as: "00V",
"000V", "B0V", "B00V") is removed and replaced with ‘0’.
Receive Negative Data Output/Line Code Violation Indicator -
Channel 0:
Receive Negative Data Output/Line Code Violation Indicator -
Channel 1:
Receive Negative Data Output/Line Code Violation Indicator -
Channel 2:
Receive Negative Data Output/Line Code Violation Indicator -
Channel 3:
In Dual Rail mode, a negative pulse is output through RNEG.
Line Code Violation Indicator - Channel n:
If configured in Single Rail mode then Line Code Violation will be output.
Receive Ring Input - Channel 0:
Receive Ring Input - Channel 1:
Receive Ring Input - Channel 2:
Receive Ring Input - Channel 3:
These pins along with RTIP receive the bipolar line signal from the remote
DS3/E3/STS-1 Terminal.
Receive TIP Input - Channel 0:
Receive TIP Input - Channel 1:
Receive TIP Input - Channel 2:
Receive TIP Input - Channel 3:
These pins along with RRING receive the bipolar line signal from the Remote
DS3/E3/STS-1 Terminal.
7