XR16L2750_05 Datasheet, PDF (43/48 Pages) Exar Corporation – 2.25V TO 5.5V DUART WITH 64-BYTE FIFO

xr
REV. 1.2.1
XR16L2750
2.25V TO 5.5V DUART WITH 64-BYTE FIFO
FIGURE 22. TRANSMIT READY & INTERRUPT TIMING [FIFO MODE, DMA MODE DISABLED] FOR CHANNELS A & B
TX FIFO
Empty
TX
(Unloading)
INT*
IER[1]
enabled
TXRDY#
Data in
TX FIFO
Start
Bit
Stop
Bit
S D0:D7 T
ISR is read
S D0:D7 T S D0:D7 T T S D0:D7 T S D0:D7 T
T_SI
ISR is read
TX FIFO fills up
to trigger level
T_WRI
TX FIFO drops
below trigger level
T_WT
Last Data Byte
Transmitted
S D0:D7 T
T_SRT
TX FIFO
Empty
IOW#
(Loading data
into FIFO)
*INT is cleared when the ISR is read or when TX FIFO fills up to the trigger level.
TXDMA#
FIGURE 23. TRANSMIT READY & INTERRUPT TIMING [FIFO MODE, DMA MODE ENABLED] FOR CHANNELS A & B
Start
Bit
Stop
Bit
TX
(Unloading)
S D0:D7 T S D0:D7 T
IER[1]
enabled
ISR Read
D0:D7 S D0:D7 T
S D0:D7 T S D0:D7 T
T_SRT
T_SI
Last Data Byte
Transmitted
S D0:D7 T
ISR Read
INT*
TXRDY#
TX FIFO fills up
to trigger level
T_WRI
TX FIFO
Full
TX FIFO drops
below trigger level
At least 1
empty location
in FIFO
T_WT
IOW#
(Loading data
into FIFO)
*INT cleared when the ISR is read or when TX FIFO fills up to trigger level.
TXDMA
43