XR17V352 Datasheet, PDF (29/64 Pages) Exar Corporation – HIGH PERFORMANCE DUAL PCI EXPRESS UART

REV. P1.0.1
PRELIMINARY
XR17V352
HIGH PERFORMANCE DUAL PCI EXPRESS UART
Channel 0 to 1 Receive Data in 32-bit alignment through the Configuration Register Address
0x0100 and 0x0500
Receive Data Byte n+3
Receive Data Byte n+2
Receive Data Byte n+1
Receive Data Byte n+0
B7 B6 B5 B4 B3 B2 B1 B0 B7 B6 B5 B4 B3 B2 B1 B0 B7 B6 B5 B4 B3 B2 B1 B0 B7 B6 B5 B4 B3 B2 B1 B0
PCI Bus
Data Bit-31
PCI Bus
Data Bit-0
2.1.2 Special Rx FIFO Data Unloading at locations 0x0200 and 0x0600
The XR17V352 also provides the same RX FIFO data along with the LSR status information of each byte side-
by-side, at locations 0x0200 (channel 0) and 0x0600 (channel 1). The entire RX data along with the status can
be downloaded in a single PCI Burst Read operation of 32 DWORD reads. The Status and Data bytes must be
read in 16 or 32 bits format to maintain data integrity. The following tables show this clearly.
READ RX FIFO,
WITH LSR ERRORS
Read n+0 to n+1
Read n+2 to n+3
Etc
BYTE 3
FIFO Data n+1
FIFO Data n+3
BYTE 2
LSR n+1
LSR n+3
BYTE 1
FIFO Data n+0
FIFO Data n+2
BYTE 0
LSR n+0
LSR n+2
Channel 0 to 1 Receive Data with Line Status Register in 32-bit alignment through the Configuration
Register Address 0x0200 and 0x0600
Receive Data Byte n+1
Line Status Register n+1
Receive Data Byte n+0
Line Status Register n+0
B7 B6 B5 B4 B3 B2 B1 B0 B7 B6 B5 B4 B3 B2 B1 B0 B7 B6 B5 B4 B3 B2 B1 B0 B7 B6 B5 B4 B3 B2 B1 B0
PCI Bus
Data Bit-31
PCI Bus
Data Bit-0
2.1.3 Tx FIFO Data Loading at locations 0x100 and 0x500
The TX FIFO data (up to the maximum 256 bytes) can be loaded in a single burst 32-bit write operation
(maximum 16 DWORD writes) at memory locations 0x0100 (channel 0) and 0x0500 (channel 1).
WRITE TX FIFO
Write n+0 to n+3
Write n+4 to n+7
Etc.
BYTE 3
FIFO Data n+3
FIFO Data n+7
BYTE 2
FIFO Data n+2
FIFO Data n+6
BYTE 1
FIFO Data n+1
FIFO Data n+5
BYTE 0
FIFO Data n+0
FIFO Data n+4
29