XRT73L03 Datasheet, PDF (24/62 Pages) Exar Corporation – 3 CHANNEL E3/DS3/STS-1 LINE INTERFCE UNIT

XRT73L03 3 CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT
REV. P1.0.13
áç
PRELIMINARY
ELECTRICAL CHARACTERISTICS (CONTINUED), (TA = 25⁰C, VDD = 3.3 + 5%, UNLESS OTHERWISE SPECIFIED)
Microprocessor Serial Interface Timing (See Figure 6)
SYMBOL
PARAMETER
MIN.
TYP.
MAX
UNITS
t₂₁ CS Low to Rising Edge of SClk Setup Time
t₂₂ CS High to Rising Edge of SClk Hold Time
t₂₃ SDI to Rising Edge of SClk Setup Time
t₂₄ SDI to Rising Edge of SClk Hold Time
t₂₅ SClk "Low" Time
t₂₆ SClk "High" Time
t₂₇ SClk Period
t₂₈ CS Low to Rising Edge of SClk Hold Time
t₂₉ CS "Inactive" Time
t₃₀ Falling Edge of SClk to SDO Valid Time
t₃₁ Falling Edge of SClk to SDO Invalid Time
t₃₂ Falling Edge of SClk, or rising edge of CS to High Z
t₃₃ Rise/Fall time of SDO Output
50
ns
20
ns
50
ns
50
ns
240
ns
240
ns
500
ns
50
ns
250
ns
200
ns
100
ns
100
ns
40
ns
ABSOLUTE MAXIMUM RATINGS
Storage Temperature
- 65⁰C to + 150⁰C
Operating Temperature
- 40⁰C to + 85⁰C
Supply Voltage Range
-0.5V to +3.465V
Theta-JA
23° C/W
Theta-JC
7° C/W
NOTE: The XRT73L03 is assembled in a thermally
enhanced package with an intergral Copper Heat Slug.
The Heat Slug is solder plated and is exposed on the bot-
tom of the package and is electrically connected to the
Ground connections of the device. This Heat Slug can be
soldered to the mounting board if desired, but must be iso-
lated from any V_DD connections.
21