|
XRT73L03 Datasheet, PDF (2/62 Pages) Exar Corporation – 3 CHANNEL E3/DS3/STS-1 LINE INTERFCE UNIT | |||
|
◁ |
XRT73L03 3 CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT
REV. P1.0.13
áç
PRELIMINARY
TRANSMIT INTERFACE CHARACTERISTICS
RECEIVE INTERFACE CHARACTERISTICS
⢠Accepts either Single-Rail or Dual-Rail data from
Terminal Equipment and generates a bipolar signal
from the line
⢠Integrated Pulse Shaping Circuit.
⢠Built-in B3ZS/HDB3 Encoder (which can be dis-
abled)
⢠Contains Transmit Clock Duty Cycle Correction Cir-
cuit on-chip
⢠Generates pulses that comply with the ITU-T G.703
pulse template for E3 applications
⢠Generates pulses that comply with the DSX-3 pulse
template, as specified in Bellcore GR-499-CORE
and ANSI T1.102_1993
⢠Generates pulses that comply with the STSX-1
pulse template, as specified in Bellcore GR-253-
CORE
⢠Transmitter can be turned off in order to support
redundancy designs
⢠Integrated Adaptive Receive Equalization (optional)
and Timing Recovery
⢠Declares and Clears the LOS defect per ITU-T
G.775 requirements for E3 and DS3 applications
⢠Meets Jitter Tolerance Requirements, as specified
in ITU-T G.823_1993 for E3 Applications
⢠Meets Jitter Tolerance Requirements, as specified
in Bellcore GR-499-CORE for DS3 Applications
⢠Declares Loss of Signal (LOS) and Loss of Lock
(LOL) Alarms
⢠Built-in B3ZS/HDB3 Decoder (which can be dis-
abled)
⢠Recovered Data can be muted while the LOS Con-
dition is declared
⢠Outputs either Single-Rail or Dual-Rail data to the
Terminal Equipment
⢠Receiver can be powered down in order to con-
serve power in redundancy designs
2
|
▷ |