SI8513-C-IS Datasheet, PDF (6/37 Pages) List of Unclassifed Manufacturers – Si85XX UNIDIRECTIONAL AC CURRENT SENSORS

Si85xx
Table 3. Insulation and Safety-Related Specifications
Parameter
Symbol
Test Condition
Value Unit
SOIC-20
Minimum Air Gap (Clearance)
L(1O1)
7.6 min mm
Minimum External Tracking (Creepage)
L(1O2)
7.6 min mm
Minimum Internal Gap
(Internal Clearance)
0.2 mm
Tracking Resistance
(Comparative Tracking Index)
Resistance (Input-Output)¹
Capacitance (Input-Output)¹
Input Capacitance²
CTI
DIN IEC 60112/VDE 0303 Part 1
>175
V
R_IO
10¹²

C_IO
f = 1 MHz
1.4
pF
C_I
4.0
pF
Notes:
1. To determine resistance and capacitance, the Si85xx is converted into a 2-terminal device. Pins 1–10 are shorted
together to form the first terminal and pins 11–20 are shorted together to form the second terminal. The parameters are
then measured between these two terminals.
2. Measured from input pin to ground.
Table 4. IEC 60664-1 (VDE 0884 Part 2) Ratings
Parameter
Test Conditions
Basic Isolation Group
Installation Classification
Material Group
Rated Mains Voltages < 150 V_RMS
Rated Mains Voltages < 300 V_RMS
Rated Mains Voltages < 400 V_RMS
Rated Mains Voltages < 600 V_RMS
Rated Mains Voltages < 1000 V_RMS
Specification
SOIC-20
IIIa
I-IV
I-IV
I-IV
I-IV
I-III
6
Preliminary Rev. 0.4