ISE40-T1-22 Datasheet, PDF (5/17 Pages) List of Unclassifed Manufacturers – High Precision, Digital Pressure Switch

ZSE40/ISE40 ^{High Precision,}
Digital Pressure Switch Series
Description
3 1/2-digit LED
Displays present pressure.
Displays each mode.
Displays error mode.
LED (Green)
Displays OUT1 output condition
When it is ON, the LED is
illuminated.
UP button
Switching of the mode and set value
kPa
OUT1
OUT2
SET
LED (Red)
Displays OUT2 output condition.
When it is ON, the LED is
illuminated.
DOWN button
Switches the mode and set value.
SET button
Switches to each mode and fixes
the set value.
Calibration Procedures
Setting procedure
Initial setting
Set “Output mode”, “Response
time” and “Auto or Manual
mode”.
Manual
pressure setting
Enter the set value of the
pressure to perform switch
output.
Auto
preset
Automatically sets the pressure
for the adsorption confirmation
or supply pressure
confirmation.
Zero clear
Adjusts the zero point of the
atmospheric pressure.
Manual
pressure setting
Allows fine-tuning of the
data set automatically by
auto preset.
Key lock
mode
Mode is not switched, even if
the button is pressed during
operation.
Normal operation
Measured pressure is
displayed and the switch
operation begins.
ZSE„
ISE„
PSE
ZI _SE3
PS
ZI _SE12
ZSP
ISA2
IS„
ZSM
PF2„
IF„
Data
16-2-19