BXRC-17E10K0-B-74-SE Datasheet, PDF (20/32 Pages) List of Unclassifed Manufacturers – Bridgelux Vero SE 29 Array Series

Absolute Maximum Ratings
Table 7: Maximum Ratings
Parameter
LED Junction Temperature (T_j)
Storage Temperature
Operating Case Temperature¹ (T_c)
Maximum Drive Current³
Maximum Peak Pulsed Drive Current⁴
Maximum Reverse Voltage⁵
Maximum Rating
125°C
-40°C to +105°C
105°C
BXRC-xxx10Kx-B-7x-SE BXRC-xxx10Kx-C-7x-SE BXRC-xxx10Kx-D-7x-SE
3600mA
3420mA
4200mA
5140mA
4890mA
6000mA
-90V
-120V
-65V
Notes for Table 7:
1. For IEC 62717 requirement, please consult your Bridgelux sales representative.
2. Refer to Bridgelux Application Note AN121: Assembly Considerations for Bridgelux Vero SE LED Arrays.
3. Arrays may be driven at higher currents however lumen maintenance may be reduced.
4. Bridgelux recommends a maximum duty cycle of 10% and pulse width of 20 ms when operating LED Arrays at maximum peak pulsed
current specified. Maximum peak pulsed currents indicate values where LED Arrays can be driven without catastrophic failures.
5. Light emitting diodes are not designed to be driven in reverse voltage and will not produce light under this condition. Maximum rating
provided for reference only.
18