DS_FT2232D Datasheet, PDF (1/61 Pages) List of Unclassifed Manufacturers – Future Technology Devices International Ltd

Document No.: FT_000173
FT2232D DUAL USB TO SERIAL UART/FIFO IC Datasheet
Version 2.05
Clearance No.: FTDI# 127
Future Technology
Devices International Ltd
FT2232D Dual USB to
Serial UART/FIFO IC
The FT2232D is a dual USB to serial UART or
FIFO interface with the following advanced
features:
Single chip USB to dual channel serial / parallel
ports with a variety of configurations.
Entire USB protocol handled on the chip. No
USB specific firmware programming required.
Transfer Data Rate 300 to 3 Mbaud.
USB to parallel FIFO transfer data rate up to 1
megabyte / second.
Multi-Protocol Synchronous Serial Engine
(MPSSE) to simplify synchronous serial
protocol (USB to JTAG, USB to I²C, USB to
SPI) design.
CPU-style FIFO interface mode simplifies CPU
interface design.
MCU host bus emulation mode configuration
option.
Fast Opto-Isolated serial interface option.
FTDI‟s royalty-free Virtual Com Port (VCP) and
Direct (D2XX) drivers eliminate the
requirement for USB driver development in
most cases.
Highly integrated design includes 3.3V LDO
regulator for USB I/O, integrated POR function
and on chip clock multiplier PLL (6MHz –
48MHz).
Asynchronous serial UART interface option with
full hardware handshaking and modem
interface signals.
Enhanced bit-bang Mode interface option with
RD# and WR# strobes.
Configurable I/O drive strength.
Fully assisted hardware or X-On / X-Off
software handshaking.
UART Interface supports 7/8 bit data, 1/2 stop
bits, and Odd/Even/Mark/Space/No Parity.
Operational configuration mode and USB
Description strings configurable in external
EEPROM over the USB interface.
Low operating and USB suspend current.
Supports bus powered, self powered and high-
power bus powered USB configurations.
UHCI/OHCI/EHCI host controller compatible.
USB 2.0 Full Speed (12Mbits/Second)
compatible.
Extended -40°C to 85°C industrial operating
temperature range.
Compact 48-LD Lead Free LQFP package
+4.35V to +5.25V single supply operating
voltage range.
Dedicated Windows DLLs available for USB to
JTAG, USB to SPI, and USB to I²C applications.
ESD protection for FT2232D IO‟s:
Human Body Model (HBM) ±2kV,
Machine Mode (MM) ±100V,
Charge Device Model (CDM) ±500V,
Latch-up free..
Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced
in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are
supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology
Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your
statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in
which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary
information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by
the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park,
Glasgow, G41 1HH, United Kingdom. Scotland Registered Number: SC136640
Copyright © 2010 Future Technology Devices International Limited
1